Glossy Metallic Oak Green PPF | Self-Healing TPU Film

Oak Green is a deep, muted forest green with a calm earthy character. It reads rich and grounded in the shade and warms up under direct sun, the kind of green that looks at home on an SUV, a wagon, or a classic coupe. It sits in that sweet spot between military green and a darker British racing tone, so it feels custom without shouting. The difference here is that this is paint protection film, not a decorative vinyl. The same layer that gives you this Oak Green finish also takes the rock chips, road grit, and light scratches that would otherwise hit your factory paint. You change the color of your car and shield the paint underneath in one install. Key features Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun. Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer. Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving. Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film. Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking. Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel. Removable adhesive: peels off cleanly with heat, with no glue residue left behind. Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges. The Wrapteck 3-layer TPU structure Specifications Material TPU (thermoplastic polyurethane) Thickness 7.5mil (330 ± 10µm) Structure 3 layers Raw material Lubrizol TPU resin Adhesive Ashland acrylic adhesive Topcoat Cashew-based coating Application Wet install Roll width 1.52m (5ft) Roll lengths 3m, 6m, 9m and 15m Warranty 2 years Expected service life Up to 8 years Lab test report Performance level Premium Material TPU—Thermoplastic Polyurethane Elastomer Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels Adhesive thickness 30μm Adhesive Henkel solvent-based Acrylic-based, repositionable, slidable Adhesive type Pressure-sensitive Texture Effect Anti-scratch Color TPU PPF Car Surface Protection Film Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves Removability Removable with heat Elongation Along: min. 130%, Across: min. 150% Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where Maybe you want to know PPF, TPU, and TPH: What Each One Does and Which One Your Car Needs Does PPF Yellow? What Causes It and How to Keep Film Clear Vinyl Wrap vs PPF: Which One Your Car Needs, and When PPF vs Vinyl Wrap: Cost, Protection and Which to Choose New to wrapping? If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.