LED Lightsheet Jumper Cable | Double-Ended Solderless Connector | 14AWG | 20A | Panel-to-Panel Link

LED Lightsheet Jumper Cable – Link Panels Without Running Back to the Driver When a sign uses more than one Lightsheet, you do not want a separate power run to every panel. The Jumper Cable solves that. Clip it from a powered sheet to the next one, and power carries straight across. Repeat down the line and a full run of up to 10 sheets works from one driver feed. Here's how it works: Both ends are solderless clip connectors. One clips onto the contact pads of a sheet that already has power; the other clips onto the next sheet along. The short twisted lead between them carries the supply across the gap. One Jumper Cable per join. Why it matters: Daisy-chaining sheets with jumpers keeps the wiring tidy, cuts driver terminations to one, and makes a multi-panel sign far quicker to build and easier to fault-find. One feed in, jumpers across, done. Key Advantages: Solderless clip at both ends – Connects panel to panel by hand. No iron anywhere near the acrylic. 14AWG twisted lead – Properly sized to carry sheet current through to the next panel without becoming a bottleneck. One cable per join – A single Jumper Cable connects any sheet to the next. A 10-sheet run needs nine. Daisy-chain ready – Designed for sequential linking, so one driver feed can run a full row of up to 10 sheets. Polarity marked at each connector – Keeps positive and negative consistent across the whole chain. Perfect Applications: Multi-panel illuminated signs – Two or more sheets making one sign face, linked with jumpers and run from a single driver. Long lightbox runs up to 10 panels – Panels edge to edge, a clean short link between each, the whole row on one feed. Also ideal for exhibition walls, retail display banks, segmented backlit graphics, and any Lightsheet layout where multiple panels share one supply. Browse our LED Lightsheets and LED Drivers, or contact our technical team for free consultation: sales@weloveleds.co.uk