LevelMaster Horizontal Top Plates

Sit the bearer down, bolt it up. The horizontal top plates from LevelMaster bolt vertically into the underside of the bearer to give you a clean, square connection between stump and floor frame.Choose the shape that matches what's happening above: Straight — the everyday two-hole flat plate (200 × 75mm). Most common pick for runs of bearer. 4-Hole Straight (S4) — bigger 200 × 150mm plate with four bolt holes. Ideal for back-to-back bearers. Corner — 150 × 150mm L-shape that supports two bearers meeting at a corner without the stump poking out the edge of the building. Tee — T-shaped plate where two bearers meet at right angles in the middle of a run. End of Bearer — single-hole 140 × 75mm plate for the end of a bearer on the outside edge of the subfloor. End Slot — 200 × 75mm with a 70mm slot, designed to be used with a dog clamp for adjustability. All plates are hot dipped galvanised, M30 threaded, and work with every LevelMaster connector in the range.Features: Hot dipped galvanised M30 × 200mm thread 10mm top plate (12mm on S4 and End Slot) 14mm bolt holes Suits all LevelMaster connectors (Screw-On, Weld-On, Screw Pile) Six shapes covering straight runs, corners, tees, end-of-bearer and slotted applications Common applications: New build adjustable stump systems Restumping and relevelling Pier-and-beam subfloors Deck and verandah subframes I-beam connections (End Slot with dog clamp) Need a hand picking the right part? Drop us a line here or give us a buzz on (07) 5371-0160. We're here to help.