Geek Vape N80 Alpha Braid Coil 2 in 1

Geek Vape N80 Alpha Braid Coil 2 in 1 The GeekVape N80 Alpha Braid Prebuilt Coil 2-in-1 Pack is a premium multi-spec hardware kit curated for advanced rebuildable atomizer users. Crafted entirely from premium Nichrome 80, these multi-strand braided coils are designed to maximize surface area contact with your cotton. The pack bundles two distinct Alpha Braid configurations (0.25Ω and 0.35Ω) along with a stainless steel coil building tool. Nichrome 80 wire significantly lowers ramp-up time compared to traditional Kanthal, offering instantaneous cloud production, linear heat distribution, and enhanced crispness for multi-layered e-liquids. Key Features Advanced Braided Structure: Intricate cross-woven multi-strand braids offer immense surface coverage to capture deep flavor notes. Rapid N80 Performance: Premium Nichrome 80 wire provides ultra-fast heating times and can safely withstand higher wattages. Two Configurations Included: A versatile 2-in-1 layout offers distinct resistances to fine-tune your vapor density and warmth. Anti-Carbon Build: High-grade metal processing helps reduce rapid carbon deposits, extending the lifespan of each coil. Bonus Building Tool: Comes packaged with a dual-diameter stainless steel coil sizing rod to simplify installation and positioning. Specification Table Attribute Specification Brand GeekVape Material Type Nichrome 80 (N80) for Coils / Stainless Steel for Tool Total Coil Count 8 Prebuilt Coils per Box Set Coil Type A (4pcs) 26ga + 40ga*2(=)*16 | 0.35Ω | 3.0mm Inner Diameter | 6 Wraps Coil Type B (4pcs) 26ga + 40ga*3(=)*16 | 0.25Ω | 3.0mm Inner Diameter | 6 Wraps Coil Sizing Tool Dual stepped rod (3.0mm and 4.0mm sections) Atomizer Pairing RDAs, RTAs, and RDTAs with sub-ohm capabilities FAQ Q: What is the benefit of a braided wire structure over a regular round wire? Braided wires feature microscopic pockets across their surface. This allows the coil to trap and vaporize more e-liquid simultaneously, resulting in richer flavor and thicker vapor. Q: Can I use these coils in a dual-coil build deck? Yes. However, installing two identical coils halves the overall resistance. A dual setup of the 0.35Ω coils drops to around 0.17Ω, while the 0.25Ω coils drop to roughly 0.12Ω. Make sure your device can safely fire low resistances. Q: Do these coils require dry-burning before adding cotton? Yes. After mounting them, pulse your device at a low wattage (20W–30W). Gently strum the wraps with ceramic tweezers to remove hot spots until the coil glows evenly from the inside out. Q: Are these coils compatible with temperature control (TC) mode? No. Nichrome 80 does not have a high enough temperature resistance change for devices to measure accurately. These coils must be used strictly in standard Wattage (Power) or Bypass modes.