Bilt Hamber Dynax-S50 5ltr Extreme duty anti-corrosion wax for cavities

Dynax-S50 is a high-performance anti-corrosion wax that provides exceptionally long-lasting protection to steel surfaces. It creeps into welded seams and seals surface defects. Dynax-S50 forms a soft, brown, wax-like film that self-heals in the event of disruption. It is also able to arrest existing corrosion and to provide long-term protection to pre-corroded and corrosion-free surfaces. FEATURES: Class-leading long-term protection for cavities, voids, chassis, doors, mud traps, machinery, boats, etc. Resistant to changing conditions found in cavities, others are not. Self-healing, protects even if the film is cut. Clings to vertical surfaces. Displaces moisture. Kills existing corrosion. Deeply penetrates flanges and folded seams. Easy to use ‚ atomises superbly. Low odour. See-through coating with brown tint. Provides lubrication. Available in ready-to-use modular injection system. Multiple aerosols will be discounted. Single 750ml aerosols are supplied with one injection lance; multiple aerosols will be supplied with one injection lance for every two aerosols. The lances are reusable; please refer to the Injection Lance listing for more information. HOW TO USE: Use a brush, roller, or spray to apply Dynax-S50. Atomisation into enclosed cavities and voids is recommended to ensure thorough coverage of all surfaces. Dynax-S50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber Ferrosol. Dynax-S50 aerosols require no compressor or additional equipment. Dynax-S50 is also available in 5 litre tubs to 200 litre drums and upwards for spray application. For those without access to professional wax injection equipment, Bilt-Hamber Laboratories have developed a superb system enabling Dynax-S50 to be applied at high pressure simply, quickly, and without mess. The pressurised giant-sized Dynax-S50 aerosol dispenser accepts interchangeable heads: The 60cm cavity injection lance has a precision fluid-tip to deliver, at high pressure, a dense, finely atomised circular mist of Dynax-S50 ensuring 360-degree coverage of box sections and cavities. For accessible areas, the extension tube is removed and a solid-cone spray pattern actuator is simply clipped in its place. The pressurised aerosol dispensers contain a useful 750 ml (3/4 of a litre) of material. Dynax-S50 Pack with 60cm cavity injection lance. Dynax-S50 is tolerant of a broad range of application pressures and will form a coherent film upon application. Dynax-S50 will increase in viscosity at low storage temperatures. It is recommended to place the container in a room at around 15 degrees C for 24 hours prior to use, particularly when using low-pressure equipment for spray application. For non-aerosol dispensed Dynax-S50, warming the container (loosen cap first) by standing in a hot water bath will further reduce viscosity and is beneficial where deep crevice protection is required. Never heat aerosol dispensed product. Ensure that cavities are left unclosed for a period of 48 hours to allow the escape of carrier materials before bunging or stopping. Dynax-S50 will provide excellent protection at a wide range of film thickness ‚ aim to achieve a uniform dry-film thickness of around 50 microns. The tolerance of the material to maintain protection at very low film thickness makes Dynax-S50 the ideal choice where surface inspection is not easy or where uniform coatings are simply not possible. Dynax-S50 has been proven to substantially outperform competitive materials in salt-spray trials under conditions of ASTM B117. Dynax-S50‚ soft-film is optimised for enclosed cavities where extremely corrosive conditions develop. Dynax-S50 is also recommended for protection of valuable machinery and components in transit, machine tools, moulds, etc. Dynax-S50 can be removed using a suitable solvent. Dynax-S50 is not formulated for prolonged exposure to ultra-violet (UV) light. The advanced metal-seeking anti-corrosion molecules which form Dynax-S50 are able to displace water, so even damp surfaces can be protected. These same molecules arrest and prevent corrosion even on already rusty surfaces and provide remarkable self-healing abilities if the film is damaged. Whilst Dynax-S50 is primarily a cavity rustproofing compound, it‚ also able to prevent corrosion in a multitude of mud traps and water collecting voids. Dynax-S50 has been used with superb results to protect voids and cavities in steel boats, vessels, offshore installations, and other steel structures subject to severely corrosive atmospheres.