Black Edition LED Front Corner Turn Signal Lights for Mercedes-Benz G-Class W465 2019-2025

Mercedes-Benz G-Class owners building a dark exterior finish find the factory clear or orange front corner indicators directly above the headlight housings break the blacked-out scheme. Standard plastic shells also develop hairline cracks and internal condensation from high-speed road debris and weather exposure, reducing signal output clarity. This smoked replacement set covers the front corner positions with a uniform dark lens finish suited to urban transit and long-range touring use.The smoked polycarbonate lens mates to a rigid ABS housing for debris resistance on elevated body panels. The circuit matches the factory 9V front module output - plug-and-play pin connection, no wiring cuts, no CAN-bus dashboard alerts. E-Mark certified for street legal compliance during annual vehicle registration checks. Note: do not bench-test with a standard 12V supply - the internal LED board is rated for 9V factory signal output only and will be damaged by 12V input.Specifications SKU: SAP-W465-060 Lens Material: Hard-coated smoked polycarbonate Housing Material: ABS plastic Certification: E-Mark (European street use compliance) Operating Voltage: 9V (factory signal module output) Placement: Front corner, directly above headlight housings Kit Contents: 2x front corner turn signal assemblies Compatibility: Mercedes-Benz G-Class W465 - 2019 to 2025 Pairs with the Black Edition LED headlights and a gloss black front grille guard for a complete dark front build.FAQCan these be tested with a 12V bench battery before installation?No. The circuit is engineered strictly for the 9V factory signal module output. Connecting to a standard 12V supply will damage the internal LED board immediately.What certifications do these corner lights carry for road use?E-Mark certified. Meets European safety regulations and passes standard vehicle inspection requirements.Does installation require cutting the factory wiring harness?No. The plug pins connect directly to the factory wiring connector without splicing or routing extra wires.What tools are needed to remove the factory corner indicators?A plastic pry tool to release the lower rubber gasket tabs from the body panel and unclip the factory wiring harness. No metal tools - contact with the painted surface will leave marks.Does fitting smoked corner lights affect the Mercedes-Benz factory warranty?[Confirm with your local Mercedes-Benz dealer - warranty terms vary by market and dealer policy.]