Glossy Metallic Royal Green Color PPF (Wet Application)

VinylFrog built this film for the driver who wants green that actually looks green. Not teal. Not emerald. Not a dark mess that reads black from ten feet away. Royal green. Deep, rich, and glossy with a metallic flake that catches light like wet paint. This is a wet application film. That means you get more working time. More time to slide it into place. More time to get it right. The water-based method reduces the risk of lifting on complex curves and deep recesses. For large panels and full vehicle coverage, wet application gives you the room to breathe. The TPU construction takes the hits. Rock chips. Road debris. Scratches. UV rays. The self-healing topcoat erases light marks with heat. The hydrophobic surface sheds water and stains. Features Glossy metallic royal green finish: a rich, reflective color effect that stays green and does not fade to teal or black Color styling and paint protection combined: one film does both. No need to wrap first then protect Heat-activated self-healing topcoat: removes minor scratches and swirl marks with a heat gun, hot water, or direct sun Hydrophobic surface: excellent UV and stain resistance. Water and dirt wipe clean Scratch and corrosion resistance: stands up to daily wear, road debris, and harsh weather Pressure-sensitive acrylic adhesive: secure, long-lasting bonding with no lifting at the edges User-friendly installation: clean removal with low residue if you need to take it off Specifications Color: Royal Green Finish: Glossy Metallic Material: TPU (Thermoplastic Polyurethane) Application Method: Wet Application Adhesive: Pressure-Sensitive Acrylic Adhesive Size: 5ft × 49ft Packaging: Roll Things You Should Know: Best Paint Protection Film (PPF) How To Apply Paint Protection Film PPF Vs Vinyl Wrap How Long Does Paint Protection Film Last? How Much Does Paint Protection Film Cost? Structure Functions Recommended Uses ▲ Standard Size & Appearance Classification Unit Wet Specs Remarks Thickness Top protected film μm 50±2% PET Self-healing Layer μm 15±2% / Face Film μm 160±8 Thermoplastic Polyurethane Acrylic Adhesive μm 25±2% Solvent-based Release liner μm 85±2% Satin Semi-transparent White Surface — Glossy & Transparent Super Glossy without Orange Peel Width m 1.52±0.01% 4.98ft Length m 15±1% 49.21ft Physical properties ▲ General Properties Features Test Method/Conditions Data Gloss（60°） GB 8807 ≥90 Water Contact Angle DL/T864 Appendix A ≥75 Hardness GB/T 6739 ≥90 Elongation at Break GB/T 1040 ≥340% Coating Elongation at Break GB/T 1040 ≥85% Tensile Strength GB/T 1040 ≥20 MPa Peel Force GB/T 2792 ≥800 Scratch Repair (0.1mm) Copper brush & Heat gun Thermal Self-Healing Stain Resistance (oil-based pen) GB/T 16422.2 No Marks Acid & Alkali Resistance Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h No Marks Yellowing ΔE QUV Method 2000h ≤2.4 Application Temperature / +20℃ to +30℃ Service Temperature / -50℃ to +110℃ Recommended Shelf Life 15-25°C or 59-77° F and 45-50% Humidity 2 years Time limits Must use it within 3 months after receiving the wrap film 3 months Recommendations Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary. Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps. Aftercare: PH neutral. Avoid wax or solvents. CAUTION! 1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping. 2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch. 3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.