Top Down Bottom Up Roman Shades in Natural Linen | Cordless Light-Filtering & Blackout

EaseEase top down bottom up Roman shades opens two ways on the same window. Lower the top rail to let daylight in over the top of the shade, or raise the bottom rail the way a standard Roman shade works. Either way, the part of the window you want covered stays covered. That is the one thing a standard shade cannot do. On a street-facing living room, a ground-floor bedroom, or a bathroom, the problem is never light — it is the sightline at eye level. Dropping the top rail keeps the lower half of the glass private while the room still fills with light from above. The rest is a true Roman shade: fabric that folds rather than rolls, in a soft drape that flat blinds and roller shades cannot replicate. Two independent rails — the top rail lowers, the bottom rail raises, set each one where you want it Daylight from the top with the lower window covered — privacy without darkening the room Cordless free-stop lift on both rails — no dangling cords, child and pet safe Light-filtering through full blackout fabric, 38 colors, all made to order Custom sizing for standard and non-standard windows, inside or outside mount Best For: Street-facing living rooms, ground-floor and front bedrooms, bathrooms, nurseries, and home offices — anywhere you need privacy at eye level and light everywhere else. Note on coverage: top down bottom up roman shades holds folded fabric at both ends. Raised fully, the stack sits at the top; with the top rail lowered, fabric gathers at the top and the bottom rail rests below it. Allow a few inches of fabric at each end when planning your view. For bedrooms with an outside-mount blackout installation, some light may enter around the perimeter edges. An inside mount, or pairing the shade with side curtains, will minimize this.