All-in-One Off-Grid Power Cabinet | 5–30kWh Battery & 5–16kW Hybrid Inverter

All-In-One Off-Grid Power Cabinet – Pre-Wired Hybrid Inverter & LiFePO₄ Battery System The All-In-One Off-Grid Power Cabinet combines a hybrid inverter, modular LiFePO₄ battery storage, AC protection, generator input, and essential internal wiring into one ready-to-install enclosure. Designed for cabins, tiny homes, sheds, workshops, farms, remote accommodation, and independent sites, this system simplifies off-grid installation by keeping the major power components together in a clean, organised cabinet. Choose from 5kWh to 30kWh of battery storage and 5kW, 8kW, 10kW, or 16kW inverter options to create a system matched to your power requirements. ⚡ Key Features Pre-Wired Cabinet Design: Reduces onsite wiring time and keeps the inverter, batteries, protection devices, and essential wiring in one enclosure. Modular Battery Storage: Available from approximately 5kWh to 30kWh using Deye SE-G5.1 Pro-B 5.12kWh LiFePO₄ battery modules. Multiple Inverter Options: Choose from 5kW, 8kW, 10kW, or 16kW Deye single-phase hybrid inverter options. Generator Ready: Built-in generator input allows backup charging and extended runtime during periods of low solar generation. LiFePO₄ Battery Technology: Long-life lithium iron phosphate chemistry with stable low-voltage operation. Battery Communication: CAN and RS485 communication supports integration between the battery bank and compatible hybrid inverter. Expandable Platform: Battery capacity can be configured to suit the site and expanded later, subject to system design and inverter compatibility. Designed for Off-Grid Use: Suitable for stand-alone power systems where reliable battery storage and generator backup are required. 🔋 Battery Capacity Options Marketed Capacity Battery Modules Exact Nominal Capacity 5kWh 1 5.12kWh 10kWh 2 10.24kWh 15kWh 3 15.36kWh 20kWh 4 20.48kWh 25kWh 5 25.60kWh 30kWh 6 30.72kWh 🔌 Inverter Options Inverter Size Best Suited To 5kW Cabins, sheds, tiny homes, and smaller off-grid loads 8kW Medium off-grid homes, workshops, and larger appliance loads 10kW Larger homes, farms, and higher-demand off-grid systems 16kW Large off-grid homes, commercial sites, and high-load applications The correct inverter size will depend on your maximum load, appliance surge requirements, battery capacity, solar array size, and generator configuration. 🏡 Ideal Applications Off-grid homes and cabins Tiny homes and transportable buildings Farm sheds, workshops, pumps, and remote equipment Remote offices and accommodation Independent sites requiring battery and generator backup Essential-load and backup power systems ✅ Core System Specifications Item Specification System Type All-in-one off-grid / stand-alone hybrid power cabinet Battery Chemistry LiFePO₄ Battery Module Deye SE-G5.1 Pro-B Battery Module Energy 5.12kWh nominal per module Battery Nominal Voltage 51.2V Battery Operating Voltage 43.2V–57.6V Battery Communication CAN 2.0 / RS485 Battery Cycle Life 6,000+ cycles under stated test conditions Battery Capacity Range 5.12kWh to 30.72kWh nominal Inverter Options 5kW / 8kW / 10kW / 16kW System Voltage Class Low-voltage 48V battery system Generator Input Yes AC Supply Single-phase 📦 Typical Inclusions Pre-wired enclosure or cabinet Deye hybrid inverter Deye SE-G5.1 Pro-B LiFePO₄ battery modules AC protection devices Generator input connection Internal power and communication wiring Shutdown and safety labelling Installation and user documentation Final inclusions may vary depending on the selected inverter, battery capacity, cabinet configuration, and site requirements. ➕ Optional Add-Ons Solar panels Solar combiner boxes Solar mounting systems Additional battery modules Monitoring accessories Generator integration accessories Site-specific battery, solar, and AC cabling 🔧 Installation & Compliance This product is intended to be installed, connected, commissioned, and signed off by suitably qualified professionals in accordance with applicable Australian electrical, battery, and stand-alone power system requirements. Final system sizing, cable selection, protection settings, equipment location, generator integration, and compliance remain the responsibility of the licensed installer and system designer. ❓ Frequently Asked Questions What battery sizes are available? The system can be configured from approximately 5kWh to 30kWh using modular 5.12kWh Deye LiFePO₄ battery modules. What inverter sizes are available? Available inverter options include 5kW, 8kW, 10kW, and 16kW, depending on the load requirements and system design. Is the cabinet pre-wired? Yes. The cabinet is designed to integrate the inverter, battery modules, internal protection hardware, generator input, and essential wiring into one enclosure. Can a generator be connected? Yes. Generator input is supported for backup power and battery charging during extended periods of poor solar generation. What battery chemistry is used? The cabinet uses LiFePO₄ lithium iron phosphate battery modules. Can the battery capacity be expanded later? Yes. The battery platform is modular and can be expanded, subject to the final system configuration, available cabinet space, inverter compatibility, and installation requirements. One cabinet. Hybrid inverter. LiFePO₄ storage. Generator ready. Configure an off-grid power system matched to your site, your loads, and your future energy requirements.