Glossy Metallic Bronze Ember Vinyl Wrap

Glossy Metallic Bronze Ember Vinyl Wrap is a gloss metallic bronze car wrap with a copper-orange cast rather than the yellow-brown of most bronze film, and it is directional. The flake lies along the length of the roll, so a panel laid at ninety degrees to the one beside it reads half a shade off under identical light. Features And Specifications: Premium polymeric vinyl for long-lasting vehicle wraps. Water and weather resistant. Smooth glossy metallic finish. Acrylic-based repositionable adhesive. Air-release channels for bubble-free installation. Heat and UV resistant. Easy to clean and maintain. Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, 49ft, and 59ft. Color: Bronze Ember. Finish: Smooth, glossy metallic. Packaging: Roll. Things You Should Know: How to wrap a car? Car wrap materials Best car wrap The cost to wrap a car How Much Vinyl Do You Need To Wrap Your Vehicle Structure Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of 160g double-sided silicone coated release liner. Material High-Grade Polymeric Calendared Vinyl Film Fashionable, Stunning Color Built-in air release channels enable bubble-free application Slideable; Repositionable Medium Stretch. Maximum stretch rate: 30% Functions Recommended Uses ▲ Standard Size & Appearance Classification Unit Spec Remark Thickness Top protected film um 36±2% PET Surface materials um 120±2% High-grade PVC-Polymeric Glue um 30±2% High-quality Solvent-based Plastic liner um 130±2%(plastic) － Surface － Opaque － Width mm 1520±0. 01% 5ft Length mm 1800+1% 59ft Physical properties ▲ General Properties Features Test Method Results Release force N/25mm Temperature 25℃ and Humidity 50% 0.35 Initial tack g/25mm under 26℃ and 64%, GB31125-2014 1360 Peel Strength N/25mm 25℃and 42%, GB/T2792-1998 7.05 Holding power(h) 25℃ and 50%, GB/T4851-1998 120 Shelf life stored in +15°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years Application temperature / +20℃ to +30℃ Service Temperature / -50℃ to +110℃ Time Limits Must use it within 3 Months after you receive the wrap film 3 months Durability Vertical exposure 2 years Aging Test 1 7 days under 65°C No adhesive residue with heat Aging Test 2 10 days under 65°C No adhesive residue without heat Shrinkage / less than 4% Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater. Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary. Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps Aftercare: PH neutral, Avoid wax or solvents CAUTION! We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.