Macnaught MX Simple Safe Flow Meters

Macnaught Hazard Zone Overview Macnaught MX ExD Simple Safe Flow Meters were designed, certified and approved for most fluid Hazard Zone Atmospheres. Macnaught Hazard Meters are for clean process fluids and do not measure gases of fluids with solids. Clean Process Liquids only. The MX Hazard Meter offering provides inline .5% Volumetric Accuracy with .03% Repeatability. In Stock Sizes ¼” thru 4” .13 GPH to 320+ GPM No Flow Conditioning - put the meter where you want it Large in-stock inventory of Hazard Meters and Displays Quick response to Hazard Meter inquiries Receive an Immediate Flow Meter Proposal or Call our Meter Hotline - (647) 427-8771 METER RFQ FORM NFPA 70 NEC Location Classes, Divisions, and Groups Class I definition: Flammable gases or vapors may be present Div 1 definition: Ignitable concentrations of hazards exist under normal operation and/or where the hazard Is caused by frequent maintenance or repair work or frequent equipment failure Div 2 definition: Ignitable concentrations of hazards exist under abnormal operation conditions Group A: Acetylene Group B: Hydrogen, Butadiene, Ethylene, Oxide, Propylene Oxide, and Acrolein Group C: Ethylene, Cyclopropane, Ethyl Ether Group D: Acetone, Ammonia, Benzene, Butane, Ethanol, Gasoline, Hexane, Methane, Methanol, Naphtha, Natural Gas, Propane, and Toluene Hazard Zone / Class FAQ Q: Can I use a piece of equipment approved for use in a Division 1 hazardous location in a Division 2 hazardous location? A: Yes. If equipment has been approved for use in a Division 1 hazardous location, it can be used in a Division 2 hazardous location, providing it is in the same class and group. Q: Can equipment approved for a Class I hazardous location be used in a Class II hazardous location? A: No. Equipment approved for use in Class I hazardous locations cannot be used in Class II hazardous locations. Q: Are Divisions and Zones equivalent to one another? A: When comparing Divisions and Zones, Division 2 is equivalent to Zone 2, but Division 1 is equivalent to either Zone 0 or 1 Contact Macnaught Canada for approved Hazard Zone Liquid Flow Meters – the leading global manufacturer of specialized Oval Gear & Turbine Flow Measurement Devices. Receive an Immediate Flow Meter Proposal or Call our Meter Hotline - (647) 427-8771 METER RFQ FORM Simple Safe Specs Simple Safe Quick Specs / Downloads Macnaught MX Meters outfitted with Simple Apparatus PCB Intrinsically Safe Flow Meters and Displays meet all major Global Ex ia The Simple Safe PCB module is designed according to IEC 60079-0:2018 and IEC 60079-11:2012. It is completely passive, adds no energy to the circuits connected, and complies with the applicable clauses for Simple Apparatus (per IEC 60079-11) when used in conjunction with the Intrinsically Safe display. Both reed switch input circuits of the MX1R-IS module, are suitable for use as simple apparatus in type of protection intrinsic safety Ex ia IIC. Our Simple Safe Offering comes in three levels of performance: Fx = Meter with Integral Mount Display, no outputs: No Power Required. This model is stocked in Ontario. The unit requires no Power and will show Rate and Total with a Resettable Totalizer and a Non-Resettable totalizer. Important: Safety Barrier is provided by others Entity Parameters to size Barrier should the Display need optional 16-30VDC Power: Uo Max 30VDC, Io Max 200mA, Po Max 1.2W Gx = Meter with Integral Mount Display with (1) 4-20mA and (1) Pules Output – available contact Macnaught USA Hx = Meter with Integral Mount Display for single stage batching – available contact Macnaught USA MX Simple Safe Manual > Download PDF MX Simple Safe Product Announcement > Page Link MX Simple Safe Part Numbering > Download PDF Macnaught MX ExD Quick Specifications Model Size Connection Flow Range Max Pressure Max Temp Body Rotor MOC MX06 ¼” .13-26 GPH 1,000 PSI 158F SS-AL / SS MX09 ¼” 4-132 GPH 1,000 PSI 158F SS-AL / SS MX12 ½” .5-8 GPM 2,000 PSI 158F SS-AL / SS MX19 ¾” .8-21 GPM 2,000 PSI 158F SS-AL / PEEK-SS MX25 1” 1.6-32 GPM 2,000 PSI 158F SS-AL / PEEK-SS MX40 1.5" 2.6-66 GPM 1,500 PSI 158F SS-AL / PEEK-SS MX50 2" 4-200 GPM 1,200 PSI 158F SS-AL / PEEK-SS MX75 3” 5-194 GPM 175 PSI 158F AL / AL MX100 4" 31-320+ GPM 175 PSI 158F AL / AL Macnaught Canada can review your Hazard application and determine best fit. Contact our Meter Hotline at (647) 427-8771 Or Complete our Meter RFQ form for an immediate proposal METER RFQ FORM ExD Video Overview