Metabo HPT Cordless Pneumatic 18V 30 Degree Paper Strip Framing Nailer Kit (NR1890DCBQRY)

The Metabo HPT 18V 30-degree Cordless Pneumatic Framing Nailer (NR1890DCBQRY) brings true pneumatic speed to a cordless platform. Firing up to 6 nails per second with no compressor, hose, or gas cartridge required, this cordless framing nailer gives professional framing crews the output they expect from a pneumatic tool with the freedom of movement that only battery power provides. The 30-degree magazine accepts clipped and offset round head nails from 2 to 3-1/2 inches, covering standard framing applications while offering a more compact magazine angle that improves access in tight framing situations. At 7.7 lbs, the NR1890DCBQRY is slightly lighter than the 21-degree model, making it a strong choice for crews who drive high nail volumes and want to reduce end-of-day fatigue. Pneumatic Speed, No Hose Required Metabo HPT’s Air Spring Drive Plus system delivers the rapid, consistent driving force that framers rely on from pneumatic tools. At up to 6 nails per second, this cordless framing nailer keeps pace with production framing without the compressor startup time, pressure maintenance, or hose management that slow down traditional pneumatic setups. The included 18V/36V 10/5.0Ah MultiVolt T-PWR Tabless battery provides up to 1,170 nails per charge, giving crews the runtime to push through a full production day without frequent stops to swap batteries. Designed for Production Crews Setup and teardown time drops to minutes rather than the extended time needed to deploy a compressor and run hose. No trip hazard from the hose. No gas cartridges to track or replace. The NR1890DCBQRY removes the logistical overhead of pneumatic tools while delivering the same nail-driving performance. At 7.7 lbs, the tool is light enough to carry and use overhead without building fatigue over a full shift. The balanced, optimized design puts the weight where experienced pneumatic nailer users expect it, so the tool feels familiar from the first nail. On-site maintenance is designed to be completed in minutes, keeping crews working rather than waiting. Control and Convenience on the Jobsite The extended magazine reduces reload stops during high-volume framing runs. Switching between bump fire and sequential mode is done through the control panel without tools, and tool-less depth adjustment paired with an integrated LED light gives operators precise control and clear visibility in any lighting condition. Magazines are interchangeable for different applications. Both a rafter hook and a belt hook are included so the tool stays accessible on the jobsite without requiring a dedicated bag or staging area. The NR1890DCBQRY accepts clipped or offset round head nails from 2 to 3-1/2 inches in length, with shank diameters from .113 to .131 inch. Metabo HPT recommends using Metabo HPT Framing Nails for best results. Specifications · Voltage: 18V · Nail Angle: 30 degrees · Nail Type: Clipped or offset round head · Nail Length: 2 inches to 3-1/2 inches · Nail Diameter: .113 to .131 inch (shank) · Firing Rate: Up to 6 nails per second · Runtime: Up to 1,170 nails per charge · Tool Weight: 7.7 lbs (tool only) · Drive System: Air Spring Drive Plus · Firing Modes: Bump fire and sequential · Depth Adjustment: Tool-less · Battery: 18V/36V 10/5.0Ah MultiVolt T-PWR Tabless (included) · Warranty: Lifetime tool body, 2-year battery, 1-year charger What’s Included · Metabo HPT NR1890DCBQRY Cordless Pneumatic Framing Nailer · 18V/36V 10/5.0Ah MultiVolt T-PWR Tabless battery (BSL3650MVT) · Quick Charger (UC18YSL3Q1Y) · 30-degree Long Magazine · Safety Glasses · Carrying Bag