Wind Spinner - Sublimation Blank

Bring your favourite photos, names and colourful designs to life with a personalised wind spinner! Create a thoughtful gift, brighten up your garden or add something a little different to your handmade market stall collection. Made from white gloss aluminium, these blanks can be sublimated on both sides, then opened into a 3D decoration that spins in the breeze, in two different sizes and shapes. Product details Finish: Gloss white, with two printable sides. Includes: 1 wind spinner, hanging hook and swivel. Supplied flat and unprinted, ready to personalise. How to use Print your design: Mirror your artwork and print using sublimation ink and paper. Prepare the blank: Keep the spinner flat. Remove any protective film from both sides and wipe clean. Position your design: Secure the printed image against the white surface using heat-resistant tape. Place the transfer underneath the spinner, with protective paper above and below. Heat press: Press at 180–200°C for 60–80 seconds using high pressure. Print the other side: Carefully remove the transfer while warm—the metal will be hot. Allow to cool, then repeat for the second side using fresh protective paper. Shape and hang: Once completely cool, gently fan out the cut sections evenly to create the 3D shape. Attach the hook and swivel, then hang with room to spin freely. Press settings are a guide. Test first and adjust to suit your heat press and materials.