FJD Trion T1 Hybrid Mobile & Terrestrial LiDAR Scanner FJD-TRIONT1-LDR

Large reality-capture projects rarely have one uniform accuracy requirement. Mobile SLAM is efficient for covering buildings, corridors, roads and complex sites, but selected façades, structural elements or control areas may require the greater local accuracy of fixed-position scanning. Traditionally, that means moving between separate mobile and terrestrial systems and reconciling their datasets afterward. The FJD Trion T1 combines both workflows in one modular LiDAR scanner. Use Mobile Mode to move through the site and establish broad spatial coverage, then place the same scanner on a tripod when critical areas require denser, fixed-position capture. Mobile Mode provides up to 120 m scanning range and relative accuracy of ≤1 cm. Terrestrial Mode provides 4 mm relative accuracy at 10 m and 8 mm at 30 m, with a scanning range of up to 60 m. Mobile and terrestrial data can be processed independently or brought together when a project requires both site-wide context and higher-accuracy local detail. Integrated LiDAR, RTK and imaging systems reduce field setup, while handheld, tripod, vehicle-mounted and airborne configurations allow the scanner to adapt as site conditions change. Key Features Hybrid mobile and terrestrial scanning: Use one scanner for efficient SLAM capture and fixed-position scanning instead of deploying separate systems for overall coverage and critical detail. 640,000 points per second: Captures dense spatial data across mobile and terrestrial workflows. Up to 120 m mobile scanning range: Supports broader coverage in buildings, infrastructure corridors, industrial sites and outdoor environments. Millimetre-level terrestrial accuracy: Rated at 4 mm relative accuracy at 10 m and 8 mm at 30 m for areas that require closer measurement and inspection. Fast tripod stations: Select scan densities ranging from approximately 30 seconds to two minutes per station while maintaining the stated accuracy rating. Integrated RTK: Supports georeferenced field capture with horizontal RTK accuracy of 8 mm + 1 ppm RMS and vertical accuracy of 15 mm + 1 ppm RMS. Multiple capture configurations: Supports handheld, tripod, vehicle-mounted and airborne operation. Real-time coverage review: View the colourised point cloud in 2D or 3D during capture to identify potential gaps before leaving the site. Scan resumption: Return to a previously captured area and continue the project by matching the existing scan area. Multi-station spatial continuity: Multi-sensor SLAM records the relationship between terrestrial stations to assist alignment during processing. Three 48 MP imaging cameras: Captures 360° panoramic imagery and colour information for terrestrial scanning. Up to 3.5 hours of battery operation: Dual battery handles support extended field use. Expandable storage: Includes 512 GB of storage with support for expansion up to 1 TB. Field-ready construction: A 1.65 kg main unit, IP54 rating and -20°C to 50°C operating range support deployment across varied site conditions. Applications Building and façade documentation Scan-to-BIM and as-built capture Construction progress documentation Industrial plants and equipment areas Infrastructure corridors, bridges and tunnels Highway and roadway documentation Mining and quarry mapping Stockpile and volume documentation Surveying and site mapping Forestry and arboriculture Topographic and terrain capture Vehicle-mounted corridor scanning Air-to-ground reality capture Localized measurement of critical structures The T1 is particularly relevant where the project needs fast overall capture but selected areas cannot rely solely on mobile SLAM accuracy. LiDAR Performance & Field Capture Mobile Mode for Site-Wide Coverage Mobile Mode allows the operator to walk through complex environments while the T1 captures up to 640,000 points per second. The scanner provides a 360° × 270° LiDAR field of view and a specified mobile range of 0.5 to 120 m. CreatBot specifies the following range performance according to target reflectivity: Target Reflectivity LiDAR Range 10% reflectivity 80 m 80% reflectivity 120 m Mobile relative accuracy is rated at ≤1 cm. This mode is suited to establishing overall site geometry, documenting long or complex environments and covering areas where repeatedly setting up a tripod would slow fieldwork. Terrestrial Mode for Critical Detail When an area requires greater local accuracy, the scanner can be mounted on a tripod and operated from fixed positions. Terrestrial Performance Specification Relative accuracy at 10 m 4 mm Relative accuracy at 30 m 8 mm Scanning range 0.5–60 m Fastest stated scan per station 30 seconds Higher-density scan time Up to 2 minutes This mode is useful for façades, structural interfaces, equipment areas and other locations where mobile capture alone may not provide the required local detail. Connecting Multiple Stations As the operator moves between tripod positions, the T1 uses multi-sensor SLAM to record the spatial relationship between stations. This assists alignment in post-processing and reduces the manual work normally associated with disconnected station scans. Scan Resumption and Large Sites A single continuous mobile scanning session can run for up to one hour. For larger projects, the operator can stop and later resume by matching a previously scanned area. The software uses that overlapping area to combine the capture without requiring the operator to stitch the sections manually. The one-hour continuous-session specification is separate from the stated 3.5-hour battery runtime. Available field time can therefore support multiple sessions, subject to storage, site conditions and the selected operating configuration. Handheld, Vehicle and Airborne Capture The same scanner can be reconfigured for: Handheld capture in buildings and complex spaces Tripod capture at fixed stations Vehicle-mounted scanning for roads and long corridors Airborne capture for broader site coverage Mounts and deployment accessories must be selected for the intended configuration. Not sure where mobile accuracy is sufficient or where terrestrial stations should be added? <a href="tel:+12136988700">Talk to a Precision 3D Works reality-capture specialist</a> about the site, required deliverables and measurement tolerances. Positioning, Imaging & Data Workflow Integrated GNSS and RTK The T1 incorporates GNSS support for: GPS GLONASS Galileo BeiDou QZSS The integrated RTK system is specified at: RTK Performance Accuracy Horizontal 8 mm + 1 ppm RMS Vertical 15 mm + 1 ppm RMS PPK mode is also supported. RTK positioning accuracy and point-cloud relative accuracy describe different aspects of the dataset. RTK connects the project to real-world coordinates, while the relative-accuracy specifications describe local spatial consistency in the mobile and terrestrial scans. Mobile Imaging Mobile scanning uses: One 1080p RGB vision camera Two 48 MP imaging cameras The imaging system supports real-time colourised point-cloud review, helping the operator recognize missed areas while still onsite. Terrestrial Imaging Terrestrial Mode activates three 48 MP cameras to capture 360° panoramic imagery and colour information at each station. This adds visual context to the point cloud for inspection, documentation and project review. FJD Trion Model FJD Trion Model provides desktop and tablet tools for supported workflows including: Point-cloud processing Mobile and terrestrial dataset fusion Mesh generation 3D Gaussian Splatting CAD/BIM workflows Cross-section analysis Forestry analysis Mobile and terrestrial scans can be processed separately or combined according to the project’s required deliverable. FJD Trion Model Web FJD Trion Model Web provides browser-based access for project review, collaboration, sharing and delivery across locations. Software editions, licensing terms, included processing entitlement and cloud allowances must be confirmed when configuring the purchase. Need to confirm whether the T1 workflow will produce the deliverables required by your CAD, BIM, survey or asset-management team? <a href="mailto:support@precision3dworks.com">Send us your software and deliverable requirements</a> for configuration guidance. Included in the Purchase Included Component Status FJD Trion T1 scanner main unit Included 905 nm Class 1 LiDAR system Integrated RTK/GNSS system Integrated Three 48 MP imaging cameras Integrated 1080p RGB vision camera Integrated 512 GB internal storage Integrated Wi-Fi and USB Type-C data export Integrated The current public brochure does not provide a complete loose-item packing list. Battery handles, base, charger, tripod, carrying case, cables, mounts and software entitlements must be confirmed in the formal quotation before publication. Technical Specifications Category Specification Product type Hybrid mobile and terrestrial LiDAR scanner Point rate 640,000 points/second LiDAR wavelength 905 nm Laser safety Class 1 LiDAR field of view 360° × 270° Range at 10% reflectivity 80 m Range at 80% reflectivity 120 m Mobile scanning range 0.5–120 m Terrestrial scanning range 0.5–60 m Mobile relative accuracy ≤1 cm Terrestrial relative accuracy 4 mm at 10 m; 8 mm at 30 m Terrestrial scan duration 30 seconds to 2 minutes per station Imaging cameras 3 × 48 MP Imaging field of view 360° × 235° Imaging aperture f/2 Vision camera 1 × 1080p RGB Vision-camera field of view 80° × 47° Vision-camera aperture f/2.2 Active cameras in Mobile Mode 1 × 1080p + 2 × 48 MP Active cameras in Terrestrial Mode 3 × 48 MP GNSS constellations GPS, GLONASS, Galileo, BeiDou and QZSS Horizontal RTK accuracy 8 mm + 1 ppm RMS Vertical RTK accuracy 15 mm + 1 ppm RMS PPK support Yes Battery life Up to 3.5 hours with dual handles Battery capacity 43.2 Wh Power supply Handle battery or DC power Continuous mobile scanning session Up to 1 hour Internal storage 512 GB Maximum supported storage 1 TB Data export Wi-Fi and USB Type-C Power consumption 24 W Main-unit weight 1.65 kg Full-setup weight 2.23 kg, including battery, base and RTK Dimensions 108 × 173 × 433 mm Operating temperature -20°C to 50°C Ingress protection IP54 Optional Accessories The T1 supports several deployment configurations. Final compatibility, included hardware and ordering codes must be confirmed for each configuration. Accessory or Configuration Purpose Tripod configuration Fixed-position terrestrial scanning Vehicle mount Mobile capture along roads, corridors and large sites Drone mount Airborne data capture and air-to-ground project coverage Additional battery handles Extended field deployment Storage expansion Increase onboard capacity from 512 GB up to 1 TB FJD Trion Model Professional point-cloud processing and analysis FJD Trion Model Web Browser-based project review, sharing and collaboration Request a Free Demo Send us an email to book a Demo: support@precision3dworks.com. Or Give us a call to: (213) 698-8700 ext 2 Support & Resources 📄 Product Brochure Review the official FJD Trion T1 product brochure for the manufacturer’s performance specifications and workflow overview. 📄 Download the FJD Trion T1 Product Brochure 📄 Customer Reviews and Feedback Customer reviews and field feedback for the FJD Trion T1 will appear here as verified deployments become available. Precision 3D Works does not publish fabricated testing claims or customer experiences. Contact us to discuss how the scanner’s mobile and terrestrial modes align with your actual site conditions and deliverables. 📄 Owner’s Manual A verified public T1 hardware manual is not available in the supplied source package currently. Precision 3D Works will provide the applicable manufacturer documentation with the delivered configuration when available. Warranty Warranty duration and coverage for the T1 must be confirmed for the United States sales channel and final configuration. Warranty terms will be stated in the formal quotation and order documentation. 📄 View FJDynamics Trion Standard 1 Year Warranty