Vaporesso GTi Replacement Coils | All Ohms | 0.15-0.5Ω | 5 Pack

Vaporesso GTi Mesh Coils – Only £11.99 Keep your compatible Vaporesso tank performing properly with genuine Vaporesso GTi Replacement Coils, available from Vape Now UK x CBD Farmacy in Central London. The GTi platform is designed primarily for direct-to-lung (DTL) vaping, with large airflow channels and mesh heating built for strong flavour, substantial vapour production and higher-powered Vaporesso devices. ONLY £11.99 PER PACK OF 5 We stock the full resistance selection: ☁️ 0.15Ω Mesh – 75–90W 🔥 0.2Ω Mesh – 60–75W ⚡ 0.4Ω Mesh – 50–60W 🌿 0.5Ω Mesh – 30–40W 5 GTi coils per pack • All resistances available • £11.99 📍 Vape Now UK x CBD Farmacy 234a Shaftesbury Avenue, London, WC2H 8EG Buy in store • Order online • Central London collection • Nationwide UK delivery What Are Vaporesso GTi Coils? The Vaporesso GTi coil platform is Vaporesso's high-performance replaceable-coil system developed primarily for DTL vaping. GTi coils are used with compatible Vaporesso tanks and devices including products from the iTank, GEN, TARGET and ARMOUR families, although exact compatibility varies by device and tank. Current Vaporesso information includes the iTank T, iTank 2, ARMOUR ULTRA and GEN 200 iTank2 among GTi-platform products. Rather than replacing your complete tank when the heating element wears out: Remove old GTi coil → Prime new coil → Push into compatible tank → Fill → Allow to saturate → Vape. Each pack gives you: 5 × Vaporesso GTi Coils for £11.99 ⚡ What Do The Different GTi Ohms Mean? The Ω symbol means ohms and measures the electrical resistance of your vape coil. You don't need to understand the electrical theory to choose between them. The easiest way to think about the GTi range is: Lower Ω = Higher Power + Warmer Vape + Bigger Clouds Higher Ω = Lower Power + Cooler Vape + More Restrained Vapour Unlike the GTX range, however, the GTi family is DTL-focused overall. Even its higher-resistance options aren't intended to turn an iTank-style setup into the same tight MTL experience you'd get from a small pod system. ☁️ GTi 0.15Ω Mesh – Maximum Power & Clouds 75–90W | Best around 85W The 0.15Ω GTi Mesh sits at the most powerful end of the standard range. Vaporesso specifies an operating range of 75–90W, with approximately 85W identified as the optimum setting. Best for: High-Power DTL Choose 0.15Ω if you prefer: Maximum vapour production Warm, dense vapour Open DTL inhale High wattage Strong flavour delivery Large airflow High-VG e-liquid Lower nicotine concentrations Because you're potentially running at up to 90W, this option naturally consumes more e-liquid and battery power than the higher-resistance GTi coils. 0.15Ω = the maximum-performance GTi option. 🔥 GTi 0.2Ω Mesh – Powerful Everyday DTL 60–75W | Best around 65W The 0.2Ω GTi Mesh is still firmly designed for high-performance DTL vaping but requires less power than 0.15Ω. Vaporesso recommends: 60–75W with approximately: 65W as its preferred setting. Choose 0.2Ω for: DTL vaping Large clouds Strong flavour Warm vapour Open airflow High-VG e-liquids High performance without needing 80W+ For many DTL users, 0.2Ω is an excellent balance between cloud production, flavour and power consumption. ⚡ GTi 0.4Ω Mesh – Lower-Powered DTL 50–60W | Best around 55W The 0.4Ω GTi Mesh takes a noticeable step down in power while remaining part of Vaporesso's DTL-focused GTi platform. Vaporesso specifies: 50–60W with approximately: 55W as the preferred output. Choose 0.4Ω for: DTL vaping Slightly more restrained clouds Strong flavour Moderate warmth Lower wattage than 0.15Ω/0.2Ω Reduced battery consumption High-VG / suitable 70VG-style e-liquid If you like the airflow and flavour characteristics of an iTank-style setup but don't want to vape at 70–90W, 0.4Ω is a very useful middle ground. 🌿 GTi 0.5Ω Mesh – Lowest-Powered GTi Option Around 30–40W The 0.5Ω GTi Mesh sits at the most restrained end of the GTi range. UK technical listings consistently place this version around 30–40W, making it substantially lower-powered than the 0.15Ω, 0.2Ω and 0.4Ω alternatives. Choose 0.5Ω for: Lower-powered GTi vaping Cooler vapour Reduced cloud production More restrained DTL/RDL-style use Lower battery consumption Lower e-liquid consumption than the most powerful options Customers who don't need 50W+ 0.5Ω = the coolest and lowest-powered GTi option. It is still part of a platform built primarily around DTL vaping, so don't confuse it with a high-resistance MTL coil. 📊 Which Vaporesso GTi Coil Should I Buy? GTi Coil Wattage Sweet Spot Vapour Character 0.15Ω Mesh 75–90W ~85W ☁️☁️☁️☁️☁️ Maximum-performance DTL 0.2Ω Mesh 60–75W ~65W ☁️☁️☁️☁️ Powerful everyday DTL 0.4Ω Mesh 50–60W ~55W ☁️☁️☁️ Lower-powered DTL 0.5Ω Mesh 30–40W ~35W ☁️☁️ Most restrained GTi option The first three wattage ranges and optimum settings are directly supported by Vaporesso; the 0.5Ω range is consistently listed by established UK retailers at approximately 30–40W. Quick Recommendation Want maximum clouds? → 0.15Ω Want powerful everyday DTL? → 0.2Ω Want good DTL performance around 55W? → 0.4Ω Want the lowest-powered GTi option? → 0.5Ω 🆚 Vaporesso GTi vs GTX Coils This is one of the most important sections for your customers because: GTi and GTX are NOT the same coil. They are two different Vaporesso coil platforms and are not interchangeable. Vaporesso explicitly separates GTi as its higher-powered tank-mod platform and GTX as its broader pod-mod/compact-device platform. Vaporesso GTi Primarily designed for: DTL • Higher Wattages • iTank-style tanks • Bigger Vapour GTi range: 0.15Ω → 0.5Ω Vaporesso GTX Designed across: DTL • RDL • MTL • Pod Mods • Compact Devices GTX range extends from: 0.15Ω → 1.2Ω ⚠️ A 0.2Ω GTX coil is NOT the same as a 0.2Ω GTi coil. Having the same resistance does not make them interchangeable. If your existing coil says GTi, buy GTi. If it says GTX, buy GTX. 💧 Which E-Liquid Should I Use With GTi Coils? GTi is a sub-ohm DTL platform, so these coils generally work best with e-liquids designed for higher-powered vaping. A 70VG/30PG or other suitable high-VG e-liquid is generally the natural pairing for GTi coils, particularly at the lower resistances. UK GTi specialists similarly recommend high-VG formulations across the range. 0.15Ω Ideal for high-VG / Max-VG style liquids and lower nicotine concentrations. 0.2Ω Excellent for high-VG shortfills and everyday high-powered DTL vaping. 0.4Ω Works particularly well with 70VG/30PG-style e-liquids while operating at a more moderate wattage. 0.5Ω Suitable for customers wanting to stay within the GTi platform while reducing power towards the 30–40W region. ⚠️ Nicotine Strength Matters A liquid intended for a low-powered MTL pod system isn't necessarily appropriate for a high-powered 0.15Ω coil running at 85W. If you're unsure which e-liquid or nicotine strength suits your setup, ask us in store before purchasing. 💨 GTi Mesh Heating All of the standard GTi options use a mesh heating structure. Instead of relying on a traditional narrow wire coil, mesh provides a larger heating surface in contact with the wick. This helps the coil heat e-liquid rapidly and evenly, supporting the dense vapour and strong flavour delivery expected from a modern DTL tank. Vaporesso also designed the GTi platform with larger airflow channels, helping support the airflow required at higher wattages. 🔄 How to Prime a New GTi Coil Properly priming your coil is particularly important with high-powered sub-ohm coils. Before using a fresh GTi coil: 1. Remove your old coil 2. Add a few drops of e-liquid directly onto the visible cotton openings of the new GTi coil 3. Push the coil firmly into your compatible tank 4. Fill the tank with e-liquid 5. Leave it for approximately 5–10 minutes 6. Start at the lower end of the recommended wattage range 7. Increase gradually until you reach your preferred setting For example, don't immediately install a new 0.15Ω coil and fire it at 90W. Give the cotton time to become fully saturated first. 🔄 When Should I Replace My GTi Coil? GTi coils are consumable components. Eventually, the mesh and wick will reach the end of their useful life. Signs that you need a replacement can include: Burnt taste Muted flavour Reduced vapour Unusual taste Darkened e-liquid Difficulty wicking Performance becoming inconsistent Coil lifespan varies considerably according to your e-liquid, wattage, sweetness, vaping frequency and how well the coil was initially primed. ⚠️ Vaporesso GTi Compatibility GTi coils work with compatible Vaporesso GTi-platform tanks and devices. Current Vaporesso information includes GTi compatibility across products such as: iTank T iTank 2 ARMOUR ULTRA GEN 200 / iTank systems alongside other compatible GTi-platform hardware. Older GTi-compatible products also include devices from the TARGET 100/200 and GEN families. ⚠️ Exact compatibility varies. Your device must support: The GTi coil platform, and The resistance/wattage of the particular coil you choose. If you're unsure, bring your device, tank or old coil into our Central London shop and we'll help identify the correct replacement. ⭐ Vaporesso GTi Coil Features £11.99 per pack 5 coils per pack Full resistance range stocked 0.15Ω Mesh 0.2Ω Mesh 0.4Ω Mesh 0.5Ω Mesh DTL-focused platform Mesh heating Large airflow design Up to 90W operation High-VG friendly Compatible with supported Vaporesso GTi tanks In-store compatibility help Central London collection Online ordering Nationwide UK delivery Vaporesso GTi Coil Specifications Specification Details Brand Vaporesso Range GTi Product GTi Mesh Replacement Coils Price £11.99 Pack Size 5 Coils Available Resistances 0.15Ω / 0.2Ω / 0.4Ω / 0.5Ω 0.15Ω 75–90W 0.2Ω 60–75W 0.4Ω 50–60W 0.5Ω Approx. 30–40W Primary Vaping Style DTL Coil Construction Mesh E-Liquid Style High VG / DTL Replaceable Yes Device Included No E-Liquid Included No 📦 What's in the Pack? 5 × Vaporesso GTi Replacement Coils Choose your resistance: ☁️ 0.15Ω Mesh 🔥 0.2Ω Mesh ⚡ 0.4Ω Mesh 🌿 0.5Ω Mesh ONLY £11.99 PER PACK OF 5 That's approximately £2.40 per coil. Tank, vape device and e-liquid are sold separately. 📍 Buy Vaporesso GTi Coils in Central London – £11.99 Searching for Vaporesso GTi coils near me? We carry all GTi resistances at our Central London vape shop: Vape Now UK x CBD Farmacy 📍 234a Shaftesbury Avenue London, WC2H 8EG 0.15Ω • 0.2Ω • 0.4Ω • 0.5Ω 5 COILS — ONLY £11.99 Our Shaftesbury Avenue store is conveniently located for customers around: Covent Garden • Leicester Square • Soho • Tottenham Court Road • Holborn • Bloomsbury • Fitzrovia • Charing Cross • Piccadilly Circus • Oxford Street • West End If your GTi coil burns out while you're working, shopping or staying in Central London, you can come directly into store and choose the resistance you need. 🔎 Vaporesso GTi Coils Near Me Our Central London store is particularly useful for customers searching for: Vaporesso GTi coils near me Vaporesso GTi coils London GTi replacement coils Central London Vaporesso iTank coils London iTank 2 replacement coils London GTi coils Covent Garden Vaporesso coils Soho GTi coils Leicester Square Vaporesso coils Tottenham Court Road GTi 0.2 coils London GTi 0.4 coils London Vaporesso vape coils West End All GTi resistances available for £11.99 per 5-pack. 🛍️ Buy Online & Collect Vaporesso GTi Coils in London Already know which resistance you use? Order your Vaporesso GTi replacement coils online and select Central London collection where available. Choose: 0.15Ω | 0.2Ω | 0.4Ω | 0.5Ω 5 COILS — £11.99 Then collect from: 📍 Vape Now UK x CBD Farmacy 234a Shaftesbury Avenue, London, WC2H 8EG Convenient for customers travelling through Covent Garden, Leicester Square, Soho, Tottenham Court Road and the wider West End. 🚚 Order Vaporesso GTi Coils Online – Nationwide UK Delivery Not based in London? Order your Vaporesso GTi coils online for nationwide UK delivery. Simply choose the resistance required for your compatible GTi tank: 0.15Ω • 0.2Ω • 0.4Ω • 0.5Ω 5 × GTi Mesh Coils — £11.99 Why Buy GTi Coils From Vape Now UK x CBD Farmacy? Rather than stocking just one or two popular GTi resistances, we carry the complete standard range. That means you can choose your coil based on the performance you actually want: Maximum-power DTL • Everyday DTL • Moderate-power DTL • Lower-powered GTi vaping You'll also find our wider Vaporesso replacement range including: GTX Coils • XROS Pods • LUXE X Pods • LUXE Q Pods • VIBE Pods • Vaporesso Kits • E-Liquids And if you're confused between GTi and GTX, bring your old coil or device into our store and we'll help you identify the correct one. 🔥 Vaporesso GTi Coils – 5 Pack £11.99 ☁️ 0.15Ω – 75–90W 🔥 0.2Ω – 60–75W ⚡ 0.4Ω – 50–60W 🌿 0.5Ω – 30–40W 5 COILS — ONLY £11.99 Mesh • DTL • All Resistances • GTi Platform 📍 Vape Now UK x CBD Farmacy 234a Shaftesbury Avenue, London, WC2H 8EG Buy in store • Order online • Central London collection • Nationwide UK delivery 🔞 Adult Vaping Product Notice 18+ in the UK: This vaping product is intended strictly for adults aged 18 and over in the UK. GTi replacement coils themselves do not contain nicotine or e-liquid. If used with nicotine-containing e-liquid, nicotine is an addictive substance and is not risk-free. Keep vaping products and nicotine-containing e-liquids out of reach of children and pets.