STROBON C-1 Cree® Standalone Drone Strobe with USB Type-C Charging

This product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night. The Strobon™ C-1 is our first USB-C rechargeable navigation strobe, designed for enclosed drones including: DJI (Mini 2, Mini, Spark, Mavic Air, Mavic Mini, Phantom, Inspire) Parrot senseFly Xiaomi Walkera and others Specifically designed with DJI Mini and Mini 2 in mind, the Strobon™ C-1 uses a USB-C charging port and includes 15mm 3M Dual Lock fasteners that fit neatly under the rear motor mounts. Weighing less than 4 grams, two units can be mounted on DJI Mini series drones without compromising flight balance or exceeding the 250g regulatory weight limit. Fits between DJI Mini 2 body and rear motor mount when folded. 🔌 No Cable, No Fuss Attach the light using the included 3M Dual Lock fasteners, or your preferred adhesive. Press the button to turn on. That’s it. These fasteners offer a secure, vibration-resistant, and dust-proof mounting solution. Enhances visibility from the ground during both day and night. Top-mounted configuration provides visibility to nearby aircraft. ⚙️ Features High-intensity Cree® LED Over 2 hours of continuous operation Lightweight—compatible with DJI Mini (1/2) drones under 250g No external wiring required One-button interface for all functions Battery level and charging indicators USB Type-C charging (cable not included) Battery includes overcharge and discharge protection 🎨 Colour Selection Due to visual sensitivity and LED efficiency, each colour has different characteristics: WHITE: Best visibility and efficiency RED: Excellent for warning signals; second-best visibility GREEN: Ideal for RED/GREEN directional navigation BLUE: Lowest visibility; use for special applications only Bottom line: White and Red offer the best long-range visibility. Green is useful for orientation. Blue is for niche use cases. 🧭 Usage Battery Status: Press and release the button when OFF - 1 blink: Needs charge - 2 blinks: OK - 3 blinks: Fully charged ON/OFF: Press and hold the button for 3 seconds Charging: Use any USB-C charger or USB port (cable not included) - Rapid blinking = charging - 1s ON / 2s OFF = fully charged - Charging time ~2 hours ⚠️ Notice The built-in PCM module protects the battery from overcharging and overdischarge. If the light does not respond, it may be in low-voltage protection mode. Recharge to resume operation. 📐 Specifications Dimensions: 20mm × 16mm × 8mm Weight: ~4g Current Consumption: <30mA per hour Charge Port: USB Type-C Charge Current: Max 40mA Charge Time: Approx. 2 hours Battery: 100mAh LiPo with PCM protection