POLYCURE AQUAPRO 8280 Sports Satin Kit - Part A & B - 19.8L Mixed Total

AQUAPRO 8280 Sports Satin is a premium high-performance, two-pack water-based floor finish specifically developed for sports flooring applications. It provides exceptional abrasion resistance, outstanding chemical resistance, and excellent black heel mark resistance (BHMR), making it ideal for basketball courts, gymnasiums, indoor sports facilities, and multi-purpose halls. Designed to withstand the demands of high-traffic sporting environments, AQUAPRO 8280 Sports Gloss delivers a durable, high-gloss finish while maintaining excellent flow and levelling characteristics for a professional appearance. This environmentally responsible coating features a low VOC formulation and is non-yellowing, making it suitable for modern sports flooring systems. Note: This kit includes Part A Gloss and Part B Hardener and must be mixed before use. Features & Benefits Premium two-pack water-based technology Designed specifically for sports flooring applications Excellent abrasion resistance Outstanding chemical resistance Superior black heel mark resistance (BHMR) Fast drying Non-yellowing Low VOC formulation High-gloss finish Easy application Excellent flow and levelling Optional AQUAPRO Sports Crosslinker available for extended pot life Typical Applications Basketball courts Gymnasiums Indoor sports facilities School halls Multi-purpose halls Community recreation centres Suitable Substrates: Interior timber flooring Particleboard flooring Cork flooring Not suitable for: Exterior applications Wet areas such as bathrooms Areas surrounding swimming pools Caution: Finished surfaces may become slippery when wet. Technical Information Colour: Clear Finish: Full Gloss Solvent Resistance: Excellent Water Resistance: Excellent Levelling & Flow: Excellent Coverage: 10–12m² per litre (depending on substrate porosity, timber species, and application method) Clean Up: Water Packaging: 18L Part A Gloss 1.8L Part B Hardener Total Mixed Volume: 19.8L Surface Preparation Proper floor preparation is essential to achieve optimum performance and appearance. Fill all nail holes and imperfections with a suitable water-based timber putty and allow to dry completely. Sand uncoated timber floors using 120–150 grit sandpaper or screen-back abrasive on a flexible pad until the surface is uniformly dull and free from scratches, nibs, fluff, or fur. Vacuum thoroughly to remove all dust and debris. Take care to avoid scratching the prepared surface. Mixing Ratio Part B Hardener is specifically formulated for use with AQUAPRO Sports Gloss. Mix: 10 parts AQUAPRO Sports Gloss Part A 1 part AQUAPRO Sports Part B Hardener Mix Ratio: 10A : 1B by volume Pot Life: Approximately 6 hours at 20°C. Higher temperatures will reduce pot life. Mixing: Stir Part A thoroughly before use. Mix AQUAPRO Sports Gloss Part A with AQUAPRO Sports Part B Hardener at a ratio of 10:1 by volume. Mix thoroughly before application. Application Tools: 10mm nap microfibre roller cover Weighted applicator bar High-quality brush for cutting in edges and perimeter areas Application: Apply a liberal first coat of AQUAPRO 8020 Clear Sealer using a 10mm nap microfibre roller or weighted applicator bar and a quality brush for edges. Alternatively, FASTASEAL 3030 or FASTASEAL 3535 may be used, applied with a 6mm nap microfibre roller. For tannin-rich timbers, FASTASEAL 3535 is recommended to minimise tannin bleed. Allow the sealer to dry according to the relevant product datasheet. Sanding is not essential; however, for an improved finish, lightly sand using 150–180 grit sandpaper or screen-back abrasive. If FASTASEAL has been allowed to dry for more than 24 hours, sanding is mandatory. Vacuum all dust thoroughly. Court and game line markings may be applied after the first or second coating stage. Always test compatibility between AQUAPRO Sports Gloss and the selected line marking paint before full application. Apply the first coat of AQUAPRO Sports Gloss mixed with either AQUAPRO Sports Part B Hardener or AQUAPRO Sports Crosslinker. Allow to dry for 3–4 hours. Sanding between coats is optional but recommended for optimum finish quality. If sanding, use 150–180 grit sandpaper or screen-back abrasive and vacuum thoroughly. Apply the final coat of AQUAPRO Sports Gloss mixed with either AQUAPRO Sports Part B Hardener or AQUAPRO Sports Crosslinker. Recommended Coating System: 1 coat AQUAPRO 8020 Clear Sealer or FASTASEAL Sealer 2 coats AQUAPRO 8280 Sports Gloss Performance Benefits Long-term durability for demanding sports environments Excellent resistance to scuffing, abrasion, and black heel marks High-gloss professional sports floor appearance Superior chemical resistance Suitable for schools, sporting facilities, and commercial indoor courts 📘 Technical Data Sheet