Pioneer P6 Wall Mounted Pressure Washer

Pioneer P6 Wall Mounted Pressure Washer | Automize Mount It Once. Reach the Whole Property. The Pioneer P6 is a wall-mounted swivel pressure washer with a 30 metre retractable hose reel and a detachable remote for pressure and hose control. Portable machines solve the wrong problem. Setup and coiling is the work. Dragging a unit out, finding a socket, running a supply line, then wrestling twenty metres of hose back into a loop afterwards is what stops people washing the car as often as they intend to. The P6 lives on the wall. The head swivels, the reel pays out 30 metres and retracts on command, and a working pressure of 100–120 bar sits in the range that's genuinely right for automotive paint rather than dangerously above it. Flow runs around 6.5 litres per minute — this is a reach-and-convenience machine rather than a high-flow commercial one, and the 30 metre run is what buys you the driveway, the boundary walls, the roof, the terrace and the solar array from a single fixed point. 30 Metres of Reach A retractable reel that covers the car, the driveway, the walls and the roof from one mounted position — no repositioning the machine. Pressure Suited to Paint 100–120 bar sits in the sensible automotive range: enough to strip road film, not so much that a careless pass damages trim or seals. Remote Control A detachable remote adjusts pressure and retracts the hose from wherever you're standing, instead of walking back to the unit each time. Ready Out of the Box Ships with a foam cannon, extension rod and pressure nozzles — wash, foam and high-reach work covered from day one. 🛠️ How to Use 1 Mount & Connect Fix the unit to a solid wall within reach of a water supply and power, then connect the inlet and run the trigger until water flows steadily before switching on. 2 Set Pressure to the Surface Use the remote to dial pressure down for paint and glass, up for concrete and boundary walls. Fit the extension rod for roof, terrace and high-panel work. 3 Shut Down & Retract Switch off, close the water supply, squeeze the trigger to release residual pressure, then retract the hose back onto the reel. Specifications Model Pioneer P6 Mounting Wall mounted with swivel head Working Pressure Approximately 100–120 bar, adjustable Flow Rate Approximately 6.5 litres per minute Hose 30 metre retractable reel Remote Detachable — pressure adjustment and hose retraction Included Accessories Foam cannon, extension rod, pressure nozzles Best For Home setups covering vehicles, driveways, walls, terraces and solar panels Compared To Trolley Units Lower flow than high-output commercial machines; far greater reach and convenience Pressure and flow figures are approximate and vary with supply pressure and hose run. For solar panels, use a wide fan nozzle at a generous distance with pressure at the lower end of the range, and check your panel manufacturer's cleaning guidance first — high-pressure water directed at panel seals and junction boxes can cause damage. Keep narrow nozzles away from paint, trim, seals and skin, release residual pressure before disconnecting anything, and mount to a structurally sound wall with power and water connections installed to local standards. A machine on the wall gets used. One in the store room doesn't. Order now for quick delivery all over Pakistan.