Heavy-Duty Boat Covers for RIB Rubber Boats

DescriptionOur Heavy-Duty Boat Cover for RIB Rubber Boats has a fully cut-out rear section that protects your boat while leaving enough space for your outboard motor. NOTE: To be sure you order the correct cover, use the measuring method described under the “measuring” tab. Do this before ordering the cover because from experience we know we often have to send a different size.A boat cover of excellent quality that protects your boat through the seasons. Rear opening for roll bar. Zipper # 10 and Velcro / buckle closure. Cyclone ™ woven polyester fabric 280 g / m² Trailerable on road/highway up to 60 km/h. Measure Measuring the required length of the cover. Length: Measure the total length (L) of the boat from the bow where the hem ends over the console + any window to the rear of the boat as shown in the image. Check the table below to see which cover fits the measured length. Width:Repeat this same measuring principle for the width (W). Note that you measure over the edge where the hem of the cover normally stops. Make sure the cover fits as tightly as possible.(You can scroll the table below left to right when visiting on your mobile)SpecificationsWe recommend using good support to prevent water pockets.Delivery time & Return policyAvailable immediately.This is a clearance product; exchanging for another size is only possible if we still have it. Of course, you may return the product if it does not fit. ORDER CODE .............................. W Width of the cover ........................................ L Length of the cover ..................................... MA 602-8 (boat length 4.7-5.0m) 3700mm 6000mm MA 602-9 (boat length 5.1-5.3m) 3800mm 6600mm MA 602-10 (boat length 5.4-5.6m) 3900mm 7000mm MA 602-11 (boat length 5.7-5.9m) 4000mm 7300mm MA 602-12 (boat length 6.0-6.3m) 4200mm 7600mm MA 602-13 (boat length 6.4-6.7m) 4300mm 7900mm MA 602-14 (boat length 6.8-7.1m) 4500mm 8400mm MA 602-15 (boat length 7.2-7.5m) 4600mm 8700mm MA 602-16 (boat length 7.6-7.9m) 4700mm 9100mm MA 602-17 (boat length 8.0-8.3m) 4800mm 9500mm MA 602-18 (boat length 8.4-8.7m) 5000mm 10000mm MA 602-19 (boat length 8.8-9.1m) 5100mm 10500mm Weight 280 g/m2 Material 100% High Tech Polyester Water column ≥ 150 mbar (1500 mm) Light and weather resistance Note 6-7 Tensile strength ≈ 2200 N¹ | 1400 N² Stretch ≈ 40 %¹ | 30 %² Color fastness to rubbing Note 4-5³ | Note 44 Chlorine resistant Note 4-5 Water repellency Note 100 Oil repellency Note 4 Coating Polyurethane [PU] UV protection factor UPF 50+ (measured value > UPF 80)