Ford F150 Prinsu Pro Roof Rack 2021-Current

44% Stronger. 24.7 Sq Ft. Panoramic Sunroof Compatible. Prinsu Pro for 2021-2025 Ford F-150. Redesigned crossbars. 6 drop-in points per bar. 62.6 lbs. Stainless steel hardware. The Prinsu Pro Roof Rack for the 14th Gen Ford F-150 (2021-2025) builds upon a decade of innovation from the brand that created the world's first modular, low-profile roof rack system. Redesigned crossbars are 44% stronger than previous generations. Six integrated drop-in points per crossbar make securing gear faster and easier than ever. A two-part side rail design with a reinforced bend and recessed bolt-on mounting feet maximizes rigidity while maintaining a sleek, factory-fit profile that adds only 2.4 inches to your F-150's height. The result is 24.7 square feet of usable platform area sitting just 1 inch from the roof. Compatible with F-150 models equipped with a panoramic sunroof. Constructed with corrosion-resistant stainless steel hardware for lasting performance in any environment. Whether you are hauling a rooftop tent, recovery gear, bikes, kayaks, lumber, or cargo boxes, the Prinsu Pro delivers exceptional strength, modularity, and a clean look that does not sacrifice your truck's styling. Installation Notice Drilling Required: This install requires drilling into the roof for a solid, permanent mount built to handle any expedition. If you are not comfortable with drilling, have a qualified shop handle the installation. The result is a rock-solid connection designed for heavy loads and off-road use. 44% Stronger Crossbars 24.7 Sq Ft Platform Area 62.6 lbs Total Weight 2.4" Added Height Redesigned Crossbars: 44% Stronger The crossbars on the Prinsu Pro are 44% stronger than previous generations with an all-new profile engineered for heavier loads and more demanding use. Each crossbar features 6 integrated drop-in points that let you secure gear quickly without needing to slide hardware into the T-slot channel from the end. Drop accessories straight in from above, position them where you want, and lock them down. The drop-in points work alongside the full-length T-slot channels, so you still have unlimited mounting flexibility across the entire 24.7 square foot platform. Two-Part Side Rail. 1 Inch from the Roof. The Prinsu Pro features a two-part side rail design with a reinforced top bend that maximizes rigidity. Recessed bolt-on mounting feet keep the profile tight against your F-150's roofline with only 1 inch of clearance between the rack and the roof. The total added height is just 2.4 inches. This form-fitting approach reduces wind noise and drag while preserving the truck's aerodynamic profile. All hardware is corrosion-resistant stainless steel, built to withstand coastal environments, snowy climates, and muddy trails without rusting or degrading. More Features Panoramic Sunroof Compatible: The Prinsu Pro is designed to work with F-150 models equipped with a panoramic sunroof. You do not have to choose between your sunroof and a rack. The mounting design accommodates the sunroof panel without interference. Premium Aluminum Construction: Powder-coated aluminum provides an exceptional strength-to-weight ratio at just 62.6 lbs. Aluminum naturally resists rust and keeps the weight on your roof low, preserving fuel economy and keeping your center of gravity manageable. Fully Modular: Slide crossbars forward or backward to accommodate specific gear layouts. Bolt accessories into the T-slots or drop-in points anywhere on the rack without drilling new holes. Reconfigure from weekend to weekend as your needs change. Wind Deflector Options: Choose the standard wind deflector for maximum noise reduction, or the cutout version for flush-mounting a front-facing LED light bar. Both options include noise-reducing trim for a quiet ride at highway speed. Specifications Vehicle 2021-2025 Ford F-150 (14th Generation) Length 68.8" Width 56.6" Height 6.1" Weight 62.6 lbs Clearance to Roof 1" Height Added 2.4" Usable Platform Area 24.7 sq ft Construction Premium powder-coated aluminum Hardware Corrosion-resistant stainless steel Crossbar Strength 44% stronger than previous generation Drop-In Points 6 integrated per crossbar Side Rail Design Two-part with reinforced bend, recessed bolt-on mounting feet Panoramic Sunroof Compatible Wind Deflector Standard or cutout for LED light bar Installation Drilling required for permanent mount Pros Crossbars are 44% stronger than previous generations with 6 integrated drop-in points per bar 24.7 sq ft of usable platform area at just 62.6 lbs Only 2.4" of added height with 1" clearance to the roof for a true low-profile fit Compatible with F-150 models with panoramic sunroof Two-part side rail with reinforced bend maximizes rigidity and stability Corrosion-resistant stainless steel hardware for lasting performance Fully modular: T-slot channels + drop-in points provide unlimited configurations Wind deflector cutout option for flush-mounting an LED light bar Cons Drilling into the roof is required. This is a permanent modification designed for a rock-solid mount. Not reversible without repair Fits 2021-2025 F-150 (14th Gen) only. Does not fit the 2020 or older 13th Gen models Frequently Asked Questions Can I mount a rooftop tent on the Prinsu Pro F-150 rack? Yes. The 44% stronger crossbars and reinforced two-part side rail make the Pro well-suited for rooftop tent mounting. The F-150's cab roof can handle substantial loads, and the 24.7 sq ft platform provides ample room for full-size hardshell tents. Verify that the combined weight of the rack (62.6 lbs), tent, and occupants does not exceed your F-150's factory roof load capacity. Browse our rooftop tent collection here. Does this rack work with a panoramic sunroof? Yes. The Prinsu Pro for the F-150 is specifically designed to be compatible with models equipped with a panoramic sunroof. The mounting design accommodates the sunroof panel without interference. You do not have to choose between your sunroof and a rack. What drilling is required? The install requires drilling into the roof for a secure, permanent mount. This is by design. Drilled mounts provide a rock-solid connection that handles heavy loads and off-road vibration without loosening over time. If you are comfortable with a drill and following instructions, this is a manageable DIY job. If not, budget for professional installation at a local shop. What are the drop-in points? Each crossbar has 6 integrated drop-in points built into the bar profile. These are pre-cut slots that accept standard tie-down hardware, straps, or accessories without needing to slide them into the T-slot channel from the end. You drop accessories straight in from above, position them where you want, and lock them down. This makes securing and repositioning gear significantly faster than T-slot-only systems. The T-slot channels are still there for unlimited additional flexibility. Standard or cutout wind deflector? Choose the standard wind deflector if you do not plan to run a front-facing LED light bar. It provides maximum noise reduction and airflow management. Choose the cutout version if you want to flush-mount an LED light bar into the front of the rack for an integrated, clean look. Both options include noise-reducing trim. Complete Your Build Roof Top Tents - Mount a tent on your F-150 Awnings - Add shade to your truck F-150 Accessories - Build out your rig Overlanding Accessories - MaxTrax, Rotopax, and more Questions About the Prinsu Pro F-150? We will confirm year and trim compatibility, sunroof clearance, and help you choose the right wind deflector. 844-200-3979