OMAKSAN HOLEMASTER | 4000 X Line Faster

More Milling Power for Heavier Operations The Holemaster 4000 X Line Faster steps the milling unit up from 2.2 kW to 4 kW, giving shops nearly double the cutting power for thicker materials, harder substrates, and more aggressive milling operations. The same 3-axis servo drilling head with 8 vertical drills, 6 horizontal drills, and 1 saw blade handles top-face and edge drilling at production speeds. Automatic tool measurement and safety mat are standard. Overview More Milling Power for Heavier Work The 4000 X Line Faster shares the same drilling architecture as the X Line HS: 8 vertical drills, 6 horizontal drills, 1 saw blade, 3-axis servo technology, and 1300 mm panel width. The difference is the milling unit. Where the X Line HS uses a 2.2 kW motor, the Faster steps up to 4 kW. That added power matters for shops processing thicker panels, denser materials such as solid surface or composite substrates, or running aggressive milling operations where a 2.2 kW unit may slow down or wear tools faster. The 4 kW motor helps sustain higher feed rates under load, hold tighter tolerances under aggressive cuts, and reduce cycle time on heavy milling work. For furniture manufacturers and millwork producers whose work consistently pushes milling demands, the X Line Faster is the right starting point, without the cost of the Smart Faster’s automatic tool changer if you do not need it. The 4000 X Line Faster is Right For You If… Your milling operations push the limits of a 2.2 kW unit You process thicker materials or denser substrates such as solid surface You do not need an automatic tool changer, saving cost compared with the Smart Faster You work with panels up to 1300 mm wide regularly Bottom-face drilling is rare or non-existent in your workflow Features & Options Standard Equipment and Available Options The 4000 X Line Faster ships with everything needed for mass-production drilling and heavier milling operations. Automatic tool measurement and safety mat are standard. Optional upgrades add ERP integration and Z-axis extension. Standard Features Omaksan Works control software 3-axis servo-driven drilling head 8 vertical drilling spindles for top-face drilling 6 horizontal drilling spindles for edge drilling 1 saw blade for grooving operations 4 kW milling unit motor for higher-output milling Automatic tool measurement to eliminate manual tool offset entries Safety mat with pressure-sensitive auto pause/resume Hardware compatibility: Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat Unlimited panel length on the X-axis 1300 mm maximum panel width on the Y-axis Standard Z-axis: 40 mm, with 60 mm optional Top-face and 4-edge processing in a single setup Available Options Z-axis extension from 40 mm to 60 mm Barcode reader for production integration with ERP and design software Technical Specifications Specification Details Drill Block Configuration 1+0 — one top drilling head, no bottom head Control Program Omaksan Works Maximum Working Area X: Unlimited · Y: 1300 mm · Z: 40 mm, 60 mm optional Minimum Working Area X: 200 mm · Y: 70 mm · Z: 10 mm Drive Technology 3-axis servo Drilling Unit Vertical Spindles 8 Drilling Unit Horizontal Spindles 6 Drilling Unit Saw Blades 1 Milling Unit Motor Power 4 kW — higher output for heavier milling operations Automatic Tool Measurement Standard Safety Mat Standard Barcode Reader Optional Hardware Compatibility Minifix, Blum, hinges, shelf pins, dowels, rafix, Confirmat Applications Kitchen cabinets, bathroom vanities, modular furniture, casework Origin Manufactured in Bursa, Turkey