Film Scanner Megasets – All Formats (35mm, 120, 110, Minox 8x11) – Modular & Magnetic

You have multiple film formats at home but only one budget? The 4 individual film holder sets cost around €220 each in Basic and up to €1,160 in Full. This complete set brings everything in one box – and you pay significantly less. Inheritance with mixed formats? Mom shot 35mm, grandpa medium format, aunt vacation snaps on 110 – typical scenario. Instead of buying 4 systems one after another, you get everything at once here. Compatible, magnetic, stackable. You don’t want to research every time? We’ve tested compatibility for every format. CS-LITE with adapter plate Mini for 110/Minox, Direct Fit for 120, CSL adapter plate 35 for 35mm. Everything fits together without tinkering. Magnetic system, no glass plates. Dual-S-curve keeps every film strip flat – whether Minox 8x11 or 120 roll film. No Newton rings, no scratches, no threading hassle. Lift the top plate, insert film, snap in magnetically. Made in Würzburg. No imported plastic junk. We manufacture every part ourselves on our own machines – and if a frame breaks or you need a new top plate, we’ll send you a replacement, if necessary by mail directly from the workshop. Not sure which formats you really need? This all-format bundle only makes sense if you own at least 3 of the 4 formats. For 1–2 formats, a single set is more worthwhile. To the Film Scanner Finder → Contents: Basic Pro Full Basic Set (all 4 film holders): # Component SKU 1 35mm film holder (Base + Top 24×36mm) 1653b 2 120 film holder (Base + Top 6×6 56×56mm) 1654b 3 110 film holder (Base + Top 14.5×21.0mm) 1652b 4 Minox 8x11 film holder (Base + Top 8×11mm) 1651b Pro Set (Basic + CS-LITE lighting system): # Component SKU 1 CineStill CS-LITE light source (Direct Fit) 1725v 2 CSL adapter plate 35 (for 35mm) 1665p 3 CSL adapter plate Mini (for 110 + Minox) 1664p 4 35 lens hood (Hood M) + Spacer 1662p 5 120 lens hood (Hood L) + Spacer 1663p 6 Mini lens hood (Hood S) + Spacer 1661p 7 Extension tubes (Geli Spacer) 1669p 8 35mm film holder (Base + Top 24×36mm) 1653b 9 120 film holder (Base + Top 6×6) 1654b 10 110 film holder (Base + Top) 1652b 11 Minox 8x11 film holder (Base + Top) 1651b Full Set (Pro + Copy Stand MK2): # Component SKU 1 Copy Stand MK2 (60cm) – Repro stand for DSLR / DSLM 1602b + 1605v + 1606v 2–8 Complete CS-LITE lighting system (see Pro Set) 1725v, 1665p, 1664p, 1662p, 1663p, 1661p, 1669p 9–12 All 4 film holders (see Basic Set) 1651b, 1652b, 1653b, 1654b Your savings compared to individual purchase Basic Set: €219.80 individually → €199.00 bundle (you save €20.80) Pro Set: €539.80 individually → €289.00 bundle (you save €250.80) Full Set: €1,129.80 individually → €389.00 bundle (you save €740.80) Comparison values: Sum of the four individual listings (35mm + 120 + 110 + Minox 8x11) at the same set level in the Ausgeknipst shop. Technical specifications: Material: Technical plastic (PLA+), matte black, non-reflective Film formats covered: 35mm small format (24×36mm), 120 roll film (56×56mm standard), 110 pocket film (14.5×21mm), Minox 8x11 (8×11mm) Attachment: 4× neodymium magnets per film holder, top plate changed in 0.5 seconds Rubber feet: 2mm height, Shore 70A, scratch-resistant, non-slip Film guidance: Dual-S curve for even flatness without glass plates Expandable: With additional top plates for half frame (18×24), panorama X-Pan (24×82), 6×4.5, 6×7, 6×9, 126 Instamatic Made in Würzburg, Germany Who this bundle is worth it for: You have collected cameras over the past years. In the closet are a Pentax K1000, your grandma’s Rolleiflex, a Pocket Instamatic, and maybe a Minox B. Each has films that have never been digitized. This complete set is built exactly for this starting point – one system, one light table, one copy stand, four film formats. If you only have a single format, the individual film holder is more worthwhile. If you digitize three or more of the formats, the bundle almost always pays off – both financially and for shipping. Compatibility with light sources: CineStill CS-LITE / CS-LITE+ (SpectraColor) – included in Pro and Full Set, direct fit with adapter plates Negative Supply Light Source (Basic, MK1, Pro) Kaiser Slimlite Plano Raleno LED panel (e.g. PLV-S116) Jack Scanlight Each illuminated surface with at least 95×150mm usable area Care & spare parts: All parts are washable (only water, no solvents). If needed, we send individual top plates or components directly from the workshop in Würzburg. The magnets hold indefinitely, as do the PLA+ parts.