HamGeek HM X300 Kintex-7 FPGA SDR Platform DC~6GHz 160MHz PCIe 10G Ethernet for Wireless Radar & Navigation

Features: * The HamGeek HM X300 is a software-defined radio (SDR) platform based on Kintex-7 FPGA. It is suitable for next-generation wireless communication applications and can also be widely used in electronic warfare, radar, navigation, and other radio-related fields. * Software-configurable to support various new radio standards and protocols. * Built-in two microwave RF expansion slots, compatible with different microwave RF daughterboards, covering DC~6GHz carrier frequency and 160MHz signal bandwidth. * Rich high-speed interfaces including PCIe, dual 10 GigE, and dual 1 GigE. Performance Parameters: 1. Baseband Section: * ADC Sampling Rate: 200 MS/s * ADC Resolution: 14 bits * DAC Sampling Rate: 800 MS/s * DAC Resolution: 16 bits * External Host Sampling Rate (16-bit data width): 200 MS/s * Internal Reference Clock Accuracy: 2.5 ppm * Optional GPSDO Accuracy: 20 ppb 2. Microwave RF Section: Reception * Noise Figure 10~20MHz: 3~4 dB * Noise Figure 20~500MHz: 2~3 dB * Noise Figure 0.5~1.5GHz: 2~4 dB * Noise Figure 1.5~4GHz: 4~5 dB * Noise Figure 4~6GHz: 5~7 dB * Third-Order Intercept Point (RX) 10~35MHz: 4~10 dBm * Third-Order Intercept Point (RX) 35~500MHz: 10~12 dBm * Third-Order Intercept Point (RX) 0.5~1.5GHz: 8~13 dBm * Third-Order Intercept Point (RX) 1.5~6GHz: 8~9 dBm * RX IQ Imbalance: < -30 dBc Transmission * TX Output Power 10MHz~3.5GHz: >20 dBm * TX Output Power 3.5~4GHz: 18~20 dBm * TX Output Power 4~5GHz: 13~18 dBm * TX Output Power 5~6GHz: 7~13 dBm * Third-Order Intercept Point (TX) 10~500MHz: >40 dBm * Third-Order Intercept Point (TX) 0.5~3GHz: >36 dBm * Third-Order Intercept Point (TX) 3~5GHz: >20 dBm * Third-Order Intercept Point (TX) 5~6GHz: >26 dBm * TX IQ Imbalance: < -30 dBc Development & Application: * Operating Systems: For Linux, Windows * Software Development Environment: GNU Radio, Matlab, LabVIEW * Open Source Projects: OpenAirInterface, OpenLTE Environmental Specifications: * Power Supply: DC 12.5±3.5V * Full Power Consumption: ≤7.5A at 12V * Dimensions (WxDxH, 1U): 277mm x 217mm x 39mm * Weight: 1.7±0.1kg Packing List: * 1 x HamGeek HM X300 SDR Platform Packaging Details: * Package weight: 5.5kg Front Panel (Introduced from left to right): * JTAG: USB connector for on-board USB-JTAG programmer * RF Group A TX/RX LED: Data transmission indicator for TX/RX channel on Daughterboard A * RF Group A RX2 LED: Data transmission indicator for RX2 channel on Daughterboard A * REF: Indicator for external reference clock lock * PPS: Indicator for valid pulse-per-second (PPS) signal * AUX I/O: 15-pin auxiliary GPIO connector on front panel * GPS: Indicator for GPS reference lock * LINK: Indicator showing host-device communication status * RF Group B TX/RX LED: Data transmission indicator for TX/RX channel on Daughterboard B * RF Group B RX2 LED: Data transmission indicator for RX2 channel on Daughterboard B * PWR: Power switch Rear Panel: * PWR: Power connector * 1G/10G ETH: SFP+ port for Ethernet interface * REF OUT: Output port for reference clock * REF IN: Input port for reference clock * PCIe x4: Connector for wired PCI Express link * PPS/TRIG OUT: Output port for PPS signal * PPS/TRIG IN: Input port for PPS signal * GPS ANT: Connector for GPS antenna