TBRFCI1 RF trans-conductance amplifier / current injector

The TBRFCI1 is a four quadrant RF trans-conductance amplifier / current injector / current source. The output has no dead zone and can source and sink current. It has a frequency range of 0 to 50 MHz, a maximum output voltage of ± 45 V peak and a maximum linear current of ± 1 ARMS . SPECIFICATION General specification Frequency range: DC – 50 MHz, useable up to 100 MHz Transconductance: 0.1 A/V, 1 A/V Operating temperature range: -20°C to +40°C Dimensions: W 300 mm x H 150 mm x L 270 mm; Weight: 6.6 kg Input specification Input impedance: 0.1 V/A input: 50 Ω 1 V/A input: 1 MΩ Maximum input level: 0.1 V/A input: ±10 V 1 V/A input: ±1 V Input connectors: BNC-female Input protection: overdrive warning LED Output specification Output impedance: high impedance current source output Offset: adjustable; ± 45 V Output connector: 4 mm banana posts Auxiliary output: BNC-female; parallel to output connector Maximum output voltage: ±45 Vpeak Maximum output current: ±1 A DC, 1 ARMS AC Maximum output power: 45 W DC; 31.5 W AC (frequency and load impedance dependent) Voltage/current bandwidth: load impedance dependent, see chapter 3.3 Rise time: load and amplitude dependent; 6 ns to 25 ns; see chapter 3.4 Current monitor output specification Transimpedance: 1 V/A; typ. accuracy ±10% and linear phase up to 30 MHz Output impedance: 50 Ohm Output connector: BNC – female Supply specification Operating Voltage: 100 V – 120 V / 220 V – 240 V, 50 Hz / 60 Hz; switchable Indicator LED: Power ON Current consumption: 750 mA Connector: EN 60320, C14 DOCUMENTATION TBRFCI1 user manual