SIERRA | FLOW FORMED | BEADLOCK (17-20”)

The Sierra is offered in a 17x9 or a 20x9! The wheel is made by Flow Formed Aluminum Construction. After it has been casted, Flow Forming Technology applies pressure to the inner barrel of the wheel, while spinning. This process stretches and compresses the aluminum, which increases tensile strength by optimizing grain structure of the aluminum. The Sierra is available in a wide variety of bolt patterns and two offset options. Choose 4.50" backspace (-13mm Offset) to push the wheel further out and 5" backspace (0mm Offset) to bring the wheel closer into the steering knuckle. By having this higher offset wheel, your steering scrub radius will result in better performance and longevity of components. We also enlarged the lug nut bore for better lug nut options and clearance. If unsure, please email or call with questions regarding backspace and bolt patterns. The Sierra offers you the option to run a true off-road beadlock clamping ring for race/extreme vehicle use or a "simulated" accent ring for your daily driver. Both of these rings are a Forged 6061-T6 Construction for the ultimate combination of strength and lightweight. The weep holes on the inner section of the ring allow water and debris to escape after those water crossings and car washes. The ring hardware is made up of (24) zinc yellow-chromate plated hex head screws, in Grade 8 steel, 3/8"-16 thread size, and 1-1/4" long. We’ve taken the extra time to drill and tap (48) redundant holes in the lip of the wheel for long term worry free use. The beadlock rings are counterbored to provide the best protection for your bolts. This wheel is offered in a standard Machined Raw Finish. This allows you to run the wheel as is, polished, or custom coating. Please allow 2 week lead-time for us to CNC mill bolt patterns and/or apply coatings and finishes. Final Torque Specs: 25ft/lbs Reach out to us at Battle Born Wheels with any questions! 775-400-4048 / Sales@Battlebornwheels.com Available in 17x9 or 20x9 Flow Formed Aluminum Casting Forged 6061-T6 Heat Treated Rings Dual Mounting Design - Available with Off-Road Use Beadlock Ring or Simulated Accent Ring Slotted Weep Holes Wide Selection of Bolt Patterns (Email/Call for Custom Fitments) Extra Large Lug Nut Socket Clearance 24 Grade 8 Steel 3/8"-16 Thread, 1-1/4" Length Hardware 48 Redundant Double Drilled and Tapped Beadlock Screw Holes Counterbored Beadlock Screw Holes in Ring Knurling Applied on Wheel Lip and Beadlock Ring Mating Surfaces 37lbs Many more bolt patterns available, if yours is not listed please email for custom options Designed and CNC Machined in Carson City Nevada, Casting Imported. Part# Model Finish Size Bolt Pattern Backspace Offset Bore Weight Load Function TPMS Compatibility MSRP (USD) S179545450FF Sierra Machined 17x9 5x114.3 4.50” -13mm 71.5mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S179545500FF Sierra Machined 17x9 5x114.3 5.00” 0mm 71.5mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S17955450FF Sierra Machined 17x9 5x127 4.50” -13mm 71.5mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S17955500FF Sierra Machined 17x9 5x127 5.00” 0mm 71.5mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S179555450FF Sierra Machined 17x9 5x139.7 4.50” -13mm 108mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S179555500FF Sierra Machined 17x9 5x139.7 5.00” 0mm 108mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S1796135450FF Sierra Machined 17x9 6x135 4.50” -13mm 108mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S1796135500FF Sierra Machined 17x9 6x135 5.00” 0mm 108mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S179655450FF Sierra Machined 17x9 6x139.7 4.50” -13mm 108mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S179655500FF Sierra Machined 17x9 6x139.7 5.00” 0mm 108mm 37.6 lbs 2500 lbs Beadlock Yes $512.50 S179865450FF Sierra Machined 17x9 8x165.1 4.50” -13mm 130.81mm 35.7 lbs 4000 lbs Beadlock Yes $512.50 S179865500FF Sierra Machined 17x9 8x165.1 5.00” 0mm 130.81mm 35.7 lbs 4000 lbs Beadlock Yes $512.50 S1798170450FF Sierra Machined 17x9 8x170 4.50” -13mm 130.81mm 35.7 lbs 4000 lbs Beadlock Yes $512.50 S1798170500FF Sierra Machined 17x9 8x170 5.00” 0mm 130.81mm 35.7 lbs 4000 lbs Beadlock Yes $512.50 S1798180450FF Sierra Machined 17x9 8x180 4.50” -13mm 130.81mm 35.7 lbs 4000 lbs Beadlock Yes $512.50 S1798180500FF Sierra Machined 17x9 8x180 5.00” 0mm 130.81mm 35.7 lbs 4000 lbs Beadlock Yes $512.50 S20955450FF Sierra Machined 20x9 5x127 4.50” -13mm 71.5mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S20955500FF Sierra Machined 20x9 5x127 5.00” 0mm 71.5mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S2096135450FF Sierra Machined 20x9 6x135 4.50” -13mm 108mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S2096135500FF Sierra Machined 20x9 6x135 5.00” 0mm 108mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S2096135550FF Sierra Machined 20x9 6x135 5.50” +13mm 108mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S209655450FF Sierra Machined 20x9 6x139.7 4.50” -13mm 108mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S209655500FF Sierra Machined 20x9 6x139.7 5.00” 0mm 108mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S209655550FF Sierra Machined 20x9 6x139.7 5.50” +13mm 108mm 46.0 lbs 2500 lbs Beadlock Yes $681.25 S209865450FF Sierra Machined 20x9 8x165.1 4.50” -13mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S209865500FF Sierra Machined 20x9 8x165.1 5.00” 0mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S209865550FF Sierra Machined 20x9 8x165.1 5.50” +13mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S2098170450FF Sierra Machined 20x9 8x170 4.50” -13mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S2098170500FF Sierra Machined 20x9 8x170 5.00” 0mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S2098170550FF Sierra Machined 20x9 8x170 5.50” +13mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S2098180450FF Sierra Machined 20x9 8x180 4.50” -13mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S2098180500FF Sierra Machined 20x9 8x180 5.00” 0mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25 S2098180550FF Sierra Machined 20x9 8x180 5.50” +13mm 130.81mm 46.0 lbs 4000 lbs Beadlock Yes $681.25