Modern Metal Umbrella Stand with Umbrella Cutout — Entryway Holder

Modern Metal Umbrella Stand with Umbrella Cutout keeps umbrellas upright near the entry while adding a cleaner metal accent. The Modern Metal Umbrella Stand with Umbrella Cutout from Grandmix is a slim 6.3-inch deep umbrella silhouette cutout metal stand with an enclosed drip tray — designed to sit beside front doors, console tables, or hallway entries. Available in 3 finishes (Black, White, Gold) at a single 24×13.8×6.3 inch (60×35×16 cm) size. Why It Works Slimmest 6.3" depth fits beside front doors: Unlike standard floor-standing umbrella stands that require a clear corner, the slim depth tucks against walls and beside consoles without intruding into walking paths — useful in narrow apartment foyers, hallways, and behind-the-door zones. Enclosed bottom drip tray protects floors: Unlike open-bottom or wire-mesh stands that let drips reach the floor, the enclosed bottom catches water from wet umbrellas — helping keep wood floors and entryway rugs drier between rainy days. Pictographic icon design over abstract pattern: Unlike abstract perforation patterns, the laser-cut umbrella silhouette signals function at a glance — a clean pictographic icon that reads instantly across modern, Scandinavian, and contemporary entryways. Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement. Key Specs Dimensions: 24" H × 13.8" W × 6.3" D (60 × 35 × 16 cm) Capacity: 4-6 standard umbrellas, or 8-10 compact/folding umbrellas; also fits walking sticks, canes, and golf umbrellas Material: 2 mm cold-rolled steel sheet, laser-cut, electrostatic powder-coated Finishes: Black, White, Gold (Gold finish $10 higher) Weight: ~3 kg / 6.6 lb; max load ~8 kg / 17.6 lb Mounting: Free-standing (place on flat floor; best against a wall for added stability) Best placement: Entryway, foyer, hallway, beside front door, office reception What's Included Modern Metal Umbrella Stand with Umbrella Cutout (assembled, finish as ordered) Care instructions How to Use and Install The stand ships fully assembled. Place on a flat floor in your entryway, foyer, or hallway. For added stability, position against a wall or in a corner. The 6.3-inch slim depth tucks tightly against the wall; the 13.8-inch width provides a stable base for typical umbrella loads. Shake umbrellas off before placing them in the stand to reduce moisture buildup. No tools, hardware, or assembly steps required. Care The powder-coated steel finish is more humidity-resistant than unfinished bare metal and suitable for indoor use; it tolerates covered outdoor placements (porches, balconies, screened entrances). Wipe the bottom drip tray occasionally to prevent standing water buildup. Clean the frame with a soft, dry cloth or a damp cloth with mild non-abrasive detergent. Avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Frequently Asked Questions How many umbrellas does this stand hold? 4-6 standard umbrellas, or 8-10 compact/folding umbrellas, depending on canopy size. Walking sticks, canes, and golf umbrellas also fit comfortably alongside compact umbrellas. For larger umbrella collections beyond 6 standard pieces, a wider stand may suit better. Does it have a drainage tray for wet umbrellas? Yes. The bottom is enclosed to catch drips from wet umbrellas, helping keep wood floors and entryway rugs drier. Wipe the tray occasionally with a soft cloth; for heavy rain days, dump accumulated water before storing dry umbrellas inside again. Is it stable for tall folding umbrellas? The 13.8-inch wide base provides a stable footing for typical umbrella loads, including tall folding and standard umbrellas. For best stability with taller or heavier umbrellas, position the stand against a wall — this is recommended for slim-depth stands carrying full loads. Can I use it outdoors on a covered porch or balcony? The powder-coated finish is designed for indoor use; it tolerates covered outdoor placements like porches, balconies, and screened entrances. For direct rain or salt-spray exposure, choose covered locations and wipe dry after heavy rain or moisture exposure. Does it require assembly? No. The stand ships fully assembled — no tools, hardware, or assembly steps required. Unbox, place on a flat floor near your front door, and start using it immediately. The drip tray is pre-installed and ready for use.