SpeedyBee F405 V5 Flight Controller - 30.5x30.5

The SpeedyBee F405 V5 Flight Controller is crafted with precision to provide reliable performance and multi-platform support. With the built-in Bluetooth chip, full-featured wireless tuning and flashing is possible in the field. The onboard blackbox storage provides 16MB of flash memory, avoiding SD compatibility issues. Multiple UART ports and direct plug connectors simplify setup for beginners and experienced pilots alike. Check out all our 30x30 stacks & combos, and all our Speedy Bee products! Features New clock sync function improves detection accuracy Easier soldering with added direct sockets for GPS and receiver Wireless tuning and upgrading 16MB onboard blackbox storage Specifications MCU: STM32F405 IMU (Gyro): ICM42688P USB Port Type: Type-C Barometer: SPA06-003 OSD Chip: AT7456E Bluetooth Tuning: Supported. Connect via SpeedyBee App for FC firmware flashing and parameter tuning Wireless FC Firmware Upgrade: Supported DJI Air Unit Connection: Supports 6-pin direct plug-in or solder connection Blackbox: Supported, built-in 16MB storage chip Input Voltage: 3-6S LiPo Battery 5V BEC Output: 9 groups (4x +5V pads, 1x BZ+ buzzer pad, and 4x 5V pads at corners for LEDs 9V BEC Output: 2 groups (1x 9V pad on front, 1x 9V pad on back). Supports PINIO remote on/off control MCU & Gyro Power: Independent LDO 3.3V Output: 1 group (1x 3.3V pad on front) 4.5V Output: 3 groups (3x 4.5V pads on front) Can power receiver & GPS when FC is powered via USB. Max current 1A. ESC Signal: M1-M4 pads and 10-pin connector on back Servo Signal: S5-S6 pads on the front ESC Telemetry Input: Supported (UART 5) Betaflight Camera Tuning Pad: Supported (CC pad on front) I2C: Supported (GPS connector + pads) UART UART1: Bluetooth UART2: front pads for receiver UART3: DJI VTX pads + 6-pin SH1.0 UART4: GPS pads + front 6-pin SH1.0 UART5: TLM UART6: receiver pads + rear 4-pin SH1.0 ST LED Pads: Supported, on front G/5V/LED Meteor LED Strip Pads: Supported Buzzer Pads: Supported RSSI Pads: Supported Smart Port: Not Supported Supported FC Firmware: Betaflight Firmware Target Name: SPEEDYBEEF405V5 Factory Firmware Version: Betaflight 4.5.2 Configurator Version: Betaflight 10.10.0 Mounting Holes: 30.5 x 30.5 mm (⌀4mm) side opening Dimensions: 39mm x 39mm x 4.9mm (LxWxH) Weight: 8.1g Includes 1x SpeedyBee F405 V5 FC 5x FC Silicone Covers 1x 25mm 10-Pin SH1.0 1x 80mm 6-Pin SH1.0 1x 120mm 6-Pin SH1.0 1x 120mm 6-Pin SH1.0 to 4-Pin SH1.0 1x 100mm 4-Pin SH1.0 1x Quickstart Guide