eMate Natural eSun filament

eMate Natural eSun Filament eMate is made from Polycaprolactone (PCL), a bioplastic that can be used in 3D printers and 3D pens. Its operating temperature is between 70 and 100 degrees Celsius, which is quite a bit lower than other materials used in 3D printing. feature Printing temperature 70 - 100 degrees Can be used with both 3D Printer and 3D Pen. Highly flexible Use low printing temperature Filament Properties Table 3D PRINTING FILAMENT eMate Density(g/cm 3 ) 1.16 Heat Distortion Temp(℃,0.45MPa) 45 Melt Flow Index (g/10min) 0.5(70℃/2.16kg) Tensile Strength(MPa) 18 Elongation at Break(%) >800 Flexural Strength(MPa) 13 Flexural Modulus(MPa) 345 IZOD Impact Strength(kJ/㎡) Keep on Durability 4/10 Printability 6/10 Recommended printing parameters Extruder Temperature(℃) 70-100℃ Bed temperature(℃) 0°C Fan Speed 100% Printing Speed 10-20mm/s Heated Bed —— Recommended Build Surfaces —— Feature Flexible √ Elastic √ Impact Resistant √ Soft √ Composite —— UV Resistant —— Water Resistant —— Dissolvable —— Heat Resistant —— Chemically Resistant —— Fatigue Resistant —— Need drying —— Heated Bed Required √ Print recommend ——