Tie Rod Adjusting Tube, 22.5", Crossover Conversion, 1946-1971 Willys and Jeep

New reproduction steering tie rod adjusting tube. These are 22.5" in length. 11/16" thread. These were original for the 1967-1969 Jeepster Commando w/ Ross steering. This short tie rod connects the pitman arm to the passenger side steering knuckle/center socket tie rod. It is manufactured with both a right and left hand thread to assist in proper alignment. All tie rod ends must be secured with a castle nut and cotter pin. All tie rod-to-tie rod end connections must have a tie rod clamp installed with a bolt, lock washer, and nut. We DO NOT find it acceptable to cut and weld the tie rods. Use this tube when converting to crossover steering on the Willys Jeep. See part number 920536 and 921317 for tie rod ends. Fits: M38 (1950-1952) w/ crossover conversion M38A1 (1952-1963) w/ crossover conversion CJ-2A (1946-1949) w/ crossover conversion CJ-3A (1948-1953) w/crossover conversion CJ-3B (1953-1968) w/ crossover conversion CJ-5 and CJ-6 (1955-1971) crossover conversion Jeepster Commando (1967-1969) w/Ross steering only