TEAC TN-3B-SE DEMOEX

Demomaskin i nyskick. Full garanti gäller. Remdriven ink Audiotechnica AT-95 pickup (bra) Inbyggt Riaa/Phono-steg för MM-pickuper, går gå förbi om man har exterrnt Riaa Grym finish och fantastisk arm för prisklassen Lagerförs i svart Analog Turntable A new, high-performance standard for belt-drive analog turntables The TN-3B is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier and USB digital output. It employs a new tonearm with knife-edge, pivot-point bearings, co-developed with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B also employs a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality. In addition, a built-in Analog-to-Digital converter and USB port allow users to digitise their vinyl libraries on their PC/Mac. The TN-3B delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors. Features at-a-glance 2-speed, belt-drive turntable offering 33-1/3 and 45 rpm speeds Knife-edge, pivot-point tonearm designed by high-end tonearm manufacturer SAEC Static-balanced, S-shaped tone-arm with pre-installed audio-technica AT-VM95E MM cartridge Die-cast aluminum platter USB digital output for digital archiving on PC/Mac PHONO/LINE analog outputs (switchable) Built-in PHONO EQ amplifier, compatible with MM-type cartridges Hi-fi grade NJM8080 op-amp used in PHONO EQ stage Specifications Turntable section Type Belt-drive (External drive) Motor DC Motor Rotation Speeds 33-⅓ rpm, 45 rpm Wow-and-Flutters 0.1% or less S/N Ratio 67dB (A-weighted, 20kHz LPF) Turntable (Platter) Material Aluminum Die-cast Diameter 30cm Tone-arm section Type S-shape, Static-balanced Effective Length 223mm Needle Pressure Range 0g to 5.0g Compatible Cartridge Weight 3.0g to 12.0g 14g to 23g (including Head-shell) Cartridge section Type MM-type Output Voltage 4.0mV (1kHz, 5cm/sec.) Needle Pressure 1.8 to 2.2g (2.0g recommended) Weight 6.1g Head-shell weight 11g (including screws, nuts, and wires) Compatible Stylus AT-VMN95E * Average stylus life: approx. 300 hours. Analog Outputs Connector RCA Pin jack × 1 pair (Gold-plated) Output Voltage PHONO 4.0mV (1kHz) LINE 224mV (–13dBV) USB Output Connector USB B-type (DC 5V 100mA USB Bus power required) Audio Format PCM, 8k/11.025k/16k/22.5k/32k/44.1k/48kHz, 16bit Operating Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W Standby Power 0.5W Overall Dimensions (W×H×D) 420 × 117 × 356 mm / 16.5″ × 4.6″ × 14.0″ (including protrusions) Weight approx. 5.0kg / 11.0 lbs. Included Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (AT-VM95E installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE053A-V120050), Owner’s Manual (including Warranty Card) ... Turntable section Type Belt-drive (External drive) Motor DC Motor Rotation Speeds 33-⅓ rpm, 45 rpm Wow-and-Flutters 0.1% or less S/N Ratio 67dB (A-weighted, 20kHz LPF) Turntable (Platter) Material Aluminum Die-cast Diameter 30cm Tone-arm section Type S-shape, Static-balanced Effective Length 223mm Needle Pressure Range 0g to 5.0g Compatible Cartridge Weight 3.0g to 12.0g 14g to 23g (including Head-shell) Cartridge section Type MM-type Output Voltage 4.0mV (1kHz, 5cm/sec.) Needle Pressure 1.8 to 2.2g (2.0g recommended) Weight 6.1g Head-shell weight 11g (including screws, nuts, and wires) Compatible Stylus AT-VMN95E * Average stylus life: approx. 300 hours. Analog Outputs Connector RCA Pin jack × 1 pair (Gold-plated) Output Voltage PHONO 4.0mV (1kHz) LINE 224mV (–13dBV) Operating Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W Standby Power 0.5W Overall Dimensions (W×H×D) 420 × 117 × 356 mm / 16.5" × 4.6" × 14.0" (including protrusions) Weight approx. 5.0kg / 11.0 lbs. Included Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (AT-VM95E installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE053A-V120050), Owner's Manual (including Warranty Card)