Mission Darkness™ Dry Shield Faraday Phone Sleeve (Black)

Black Edition Waterproof / Signalproof / Magnetic or Velcro Dry Shield Faraday Phone Sleeve A waterproof, signal-blocking sleeve that works as an everyday privacy and focus tool just as readily as a professional enclosure, from taking your own phone off the grid to evidence handling, corporate device control, school phone programs, and event check-in. A transparent front pocket lets you keep an ID or card visible without opening the sleeve. From $35 Choose Magnetic or Velcro in the Closure Style options above. Card Slot Signal Blocking Waterproof TPU TitanRF Liner Where it works One sleeve, wherever you go dark. From one phone that needs to go quiet for a while to a room full of them under a documented process, the same sleeve handles it. Four of the most common settings are below. 01 Forensics Isolate seized devices and log them by serial for chain of custody. 02 Corporate Check in company devices with a visible asset tag, or roll out in bulk across corporate and fleet teams. 03 Schools Run phone-free classrooms and secure test-taking with named, numbered sleeves. 04 Events Check phones at venues and secure areas with a pass in the slot. What's inside Everything that keeps a device sealed. The same high-shielding technology professionals rely on, in a slim, everyday sleeve that slips into any bag or pocket. Complete Signal Isolation Blocks cell signals (including 5G), WiFi (2.4 & 5GHz), Bluetooth, GPS, RFID, NFC, and radio frequencies from low MHz to 40GHz once sealed. High-Shielding TitanRF Liner A high-shielding TitanRF Faraday liner surrounds the device on every side, keeping it fully offline while sealed. Transparent Front Card Slot A clear front pocket displays an ID, credential, name card, case number, asset tag, or event pass without opening the sleeve. Serial Number on the Front Each sleeve carries its own serial number on the front, handy for asset management or evidence records when you need it. Waterproof, Weatherproof Build Welded-seam 600D and 420D TPU exterior repels water, dust, and grime to protect the device and the shielding. EMF and EMP Protection Provides EMF radiation reduction and EMP shielding for an added layer of protection. Universal Device Fit Sized for standard phones with typical cases, plus keyfobs, GPS units, transponders, and smart watches. Two Closure Styles Choose a magnetic roll-top or a hook-and-loop roll-top closure from the buy box. Compared in detail below. Identify on the outside Keep an ID visible, right on the front. A clear front pocket shows a credential without breaking the seal, so a device is easy to identify at a glance, whether it is your own or part of a case file. A serial number on the front helps you tell one sleeve from another. Show an ID, name card, case number, asset tag, or event pass through the clear front window. Match a device to its owner, custodian, or record at a glance. Note the serial number when you need to log a specific sleeve. Made to be carried A rugged, waterproof shell around the shielding. The smooth 600D and 420D TPU exterior is welded at the seams rather than stitched, so water, dust, and grime stay out and the Faraday liner stays protected in the field, the lab, or the hallway. 600D & 420DTPU exterior WeldedSeams Sealed means silent When the top rolls down, the signals stop. Sealed inside, a device cannot send or receive calls, texts, tracking pings, or remote commands, and its microphone, camera, and location stay contained. The sleeve also provides EMF radiation reduction, so it works as an everyday privacy tool as readily as an evidence enclosure. Choose your closure One sleeve, two closure options. The same sleeve comes in two closure styles at two price points. Select one below, or use the Closure Style dropdown in the options above. Magnetic$38 Neodymium roll-top Fold the top down and the neodymium magnetic seal closes on contact. This is the patented NeoLok-style roll-top: quick, one-handed opening and closing with no strip to line up. NeoLok Patented Utility Design · Pat. US 11,166,532 B2 SKU MDFB-DS-PS-BL Velcro More economical$35 Hook-and-loop roll-top Fold the top down and press the hook-and-loop strip to secure it. A familiar, positive-grip roll-top closure and the more economical of the two options. SKU MDFB-DS-PS-BL-V Both variants share the same shielding, materials, card slot, and serial. Only the closure and price differ. The details Specifications. Tested & certified Signal coverage Low MHz to 40GHzCell (5G), WiFi 2.4 & 5GHz, Bluetooth, GPS, RFID, NFC Certified to MIL-STD 188-125IEEE 299-2006 (lab tested) SKU MDFB-DS-PS-BL (Magnetic)MDFB-DS-PS-BL-V (Velcro) Dimensions & Fit Internal usage 7.5" L x 4" W x 0.5" D (19 x 10.2 x 1.3 cm) External closed 8.5" L x 4.5" W x 0.5" D (21.6 x 11.4 x 1.3 cm) Fit Standard phone models with typical protective cases Materials & Finish Exterior Waterproof 600D and 420D TPU exterior with welded seams Interior High-shielding TitanRF Faraday liner Front Transparent card slot and a printed serial number Closure Magnetic roll-top or hook-and-loop roll-top (selectable) Usage notesThe Faraday material inside will become defective with extended water contact or any punctures, so the sleeve should not be used to hold wet devices or carry unprotected sharp objects. Ensure that no items, such as cables, penetrate the opening, as this will allow signals to pass through. Commonly used to shield Cell phones Earbuds Building access cards Passports GPS units Keyfobs Credit cards Smart watches Transponders Two-way radios Transmitters Choose your color Three finishes in the sleeve family. Black You are here Gray From $38 White From $38 Ready when you are Deploy signal isolation you can track. Add the Black sleeve above, or explore the full Dry Shield range. Outfitting a lab, a district, or a venue? Our team builds bulk and institutional quotes. Shop All Dry Shield Bags Corporate & Institutional Quotes