SL3 Centralized Cockpit Interior Lighting Hub

The SL3 Centralized Cockpit Interior Lighting Hub is designed best for semi or fully enclosed home cockpit setup. It brings multiple cockpit interior lights into one organized control system for your A320 home cockpit. Designed for 12V LED strips/modules and MobiFlight integration, it provides centralized power, dimming, and switch logic for all your interior cockpit lighting. Key Features 13 independent controllable 12v light output source 8 potentiometer support 2 on-off switch interface ATMega2560 controller with USB connection Requires and Runs on Mobiflight What it controls MIP Flood Lights (if you own the SL3 FLOOD LT, you may keep your light there, or move them here) Pedestal Flood Light (controlled at FO side) Glareshield FCU-EFIS dimming Overhead Dome lights Floor/Console Lights for Capt and FO Tray/Table Lights for Capt and FO Window-Mounted Map/Charts light Overhead Reading Lights for Capt and FO Auxiliary MIP-Pedestal Panel Backlighting plug - for your DIY panels using external 12v backlighting - connect here and you have a dimmable backlight synced with sim What's Included 12v 5000mA Power Adapter (100-240V input, US Plug only sorry) Barrel Jack adapters for each 12V socket Wire end connectors (You need to supply your own wires to extend lengths) USB Cord Pre-Configured Controller, with ready-made MF Config File from the SL3 Website Setup Update If you own the SL3 Warning Panel(s), please download the latest Mobiflight Config File to enable these panels to link its backlighting adjustment to the Glareshield dimmers instead of the MIP Integ Backlighting. Scope, Compatibility and Limitation The hub works and operates only within the Mobiflight environment. Any non-SL3 panels that addresses the same internal lighting LVars in the Sim may be compatible with the Hub. For example, the Hub controls the WinCTRL FCU-EFIS display and backlight brightness. Currently supports the FenixA320 for MSFS2020/2024. We are working on the possibility of having all the interior lights DataRefs for Toliss (X-Plane12) where possible, as well as for FBW A32NX. This hub is intended for 12V LED strips or low-power LED modules. Any high wattage lighting (30-50W or higher) is NOT recommended. If you must do this, please replace the power adapter with a high power rating that matches the power demand of your lights. Recommended installation location: Behind the FCU on the cockpit dashboard. This allows for a more uniform wiring distribution to the overhead, sides of cockpit, Glareshield and MIP. You need your own wires to extend the lengths of the supplied components (solder in-between light/potentiometer and end connectors). Made-To-Order Notice All SL3 products are (almost all) hand-crafted and hand-assembled to order. We do not maintain mass-produced ready-to-ship stock. Estimated production time may vary depending on current order queue and parts availability. Lead time is around 10-15 days.