Deluxe Big Muff Pi 2

[vc_row type=”full_width_content” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” bg_color=”#ffffff” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” row_position_desktop=”default” row_position_tablet=”inherit” row_position_phone=”inherit” overflow=”visible” id=”features” row_name=”Features” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”padding-11-percent” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”left-right” flex_gap_desktop=”10px” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_image_with_hotspots image=”215586″ preview=”https://www.ehx.com/wp-content/uploads/2026/07/10.jpg” color_1=”Accent-Color” hotspot_icon=”plus_sign” tooltip=”hover” tooltip_shadow=”large_depth” animation=”true”][nectar_hotspot left=”50.5959%” top=”18.9021%” position=”right”] 9VDC Power Jack Current draw: 45mA at 9.0VDC, center-negative polarity.[/nectar_hotspot][nectar_hotspot left=”33.3746%” top=”32.7189%” position=”right”] VOLUME Knob Sets the output level of the DBMP2 at the OUTPUT jack. As you turn this knob clockwise, your output signal gets louder.[/nectar_hotspot][nectar_hotspot left=”40.1105%” top=”32.4212%” position=”right”] BLEND Knob Mixes between the dry and distorted signals. Turn this knob fully counterclockwise for 100% dry signal and fully clockwise for 100% distorted signal. Setting the BLEND knob to noon yields a 50/50 mix of dry/distorted signal.[/nectar_hotspot][nectar_hotspot left=”46.4155%” top=”32.7515%” position=”right”] TONE Knob Provides a range of sounds from high treble to deep bass. As you turn the TONE knob clockwise, treble increases and bass decreases.[/nectar_hotspot][nectar_hotspot left=”52.9978%” top=”32.9146%” position=”left”] SUSTAIN Knob As in the original Big Muff Pi, adjusts the amount of sustain, distortion, and fuzz.[/nectar_hotspot][nectar_hotspot left=”59.3303%” top=”32.7923%” position=”left”] GATE Knob Sets the input amplitude needed to open the noise gate. As you turn the GATE knob clockwise, the amount of gating increases, requiring a louder signal at the Input jack to open the gate and allow sound to pass through to the Output jack. Turning the GATE knob down all the way disables the noise gate function.[/nectar_hotspot][nectar_hotspot left=”65.9676%” top=”32.8983%” position=”left”] MIDS LEVEL Knob When MIDS is engaged—LED near MIDS Footswitch is lit—the MIDS LEVEL knob either boosts or cuts by up to 10dB, at the frequency set by the MIDS FREQ knob located below it. Turn MIDS LEVEL clockwise from its center 12 o’clock position to boost the center frequency. To cut, turn MIDS LEVEL counterclockwise from the 12 o’clock position. This knob has a notch near the 12 o’clock position to help identify the center of the knob’s travel. In the center position, MIDS EQ is flat; it does not boost or cut. The MIDS LEVEL knob has no function when MIDS is bypassed.[/nectar_hotspot][nectar_hotspot left=”38.565731573157315%” top=”47.45723506489778%” position=”left”] WICKER Switch Activate Wicker mode by flipping the WICKER switch up to the HALF or FULL positions. The HALF position adds a touch of high frequency. The FULL position fully opens up the high frequency bandwidth for a bright and clear top end. Set the WICKER switch to OFF for the standard Big Muff Pi 2 sound.[/nectar_hotspot][nectar_hotspot left=”57.0475797579758%” top=”46.922999626769254%” position=”left”] MIDS Q Switch The Q switch sets the resonance or bandwidth of the MIDS EQ. What this means is in LOW mode the EQ sounds broader or rounder and affects a larger range of frequencies; in HIGH mode the EQ sounds sharper or peakier and affects a narrow range of frequencies.[/nectar_hotspot][nectar_hotspot left=”66.00430876420975%” top=”45.242808783189474%” position=”left”] MIDS FREQ Knob Sets the center frequency of the MIDS EQ circuit ranging from approximately 310Hz to 5.0kHz. To hear the range of the MIDS FREQ knob, turn the MIDS LEVEL knob up past 3 o’clock—make sure MIDS is enabled, the LED near MIDS Footswitch is lit—then play your instrument while turning the MIDS FREQ knob. This knob has no function if either the MIDS section is bypassed or if the MIDS LEVEL knob is set to its center position. The MIDS FREQ knob can be controlled by an external expression pedal or control voltage (CV).[/nectar_hotspot][nectar_hotspot left=”70.8471%” top=”46.8129%” position=”right”] EXP Jack Expression control input jack allows you to sweep the MIDS FREQ knob from an external source, either an expression pedal with 1/4” TRS plug or control voltage (CV) ranging from 0 to 5V on a TS plug. The MIDS FREQ knob sets the sweep range’s maximum frequency, which is the expression pedal’s toe position or 5V from CV. Minimum frequency, at the heel or 0V from CV, is the lowest frequency in the MIDS total range. Some expression pedals allow you to increase the minimum frequency at the heel with a range control. To sweep the entire MIDS frequency range, set the MIDS FREQ knob to maximum.[/nectar_hotspot][nectar_hotspot left=”70.8471%” top=”58.8189%” position=”right”] INPUT Jack Audio input jack. Impedance: 2MΩ.[/nectar_hotspot][nectar_hotspot left=”27.2827%” top=”58.2969%” position=”left”] OUTPUT Jack Audio output Jack. Impedance: 500Ω.[/nectar_hotspot][nectar_hotspot left=”65.2732%” top=”71.6079%” position=”right”] EFFECTS FOOTSWITCH & STATUS LED The soft footswitch engages or bypasses the effect. The status LED lights red when the effect is engaged. The LED is off in bypass. The DBMP2 employs buffered bypass. The EFFECT footswitch includes a momentary action: pressing and holding the footswitch for more than half a second returns DBMP2 to the previous state upon release. The momentary footswitch action may be disabled[/nectar_hotspot][nectar_hotspot left=”39.604%” top=”72.1299%” position=”left”] MIDS FOOTSWITCH & LED The soft footswitch engages or bypasses the MIDS EQ section. The MIDS LED lights white when the MIDS EQ is engaged. The LED is off when MIDS is bypassed. The MIDS footswitch includes a momentary action: pressing and holding the footswitch for more than half a second returns DBMP2 to the previous state upon release. The momentary footswitch action may be disabled[/nectar_hotspot][/nectar_image_with_hotspots][/vc_column][/vc_row]