Kink-Free Tubing 1" X 100' - Metric 25mm

True Metric Tubing for Metric Barbed Fittings and European-Built Equipment This metric 25 mm kink free pond tubing provides 100 ft (30.5 m) of flexible black tubing made for true metric barbed fittings, the standard on many European-built pond pumps, pressure filters, and UV clarifiers, including Oase equipment. A smooth interior wall minimizes friction loss so your pump delivers closer to its rated flow, while the spiral ribbed exterior resists crushing under rock and soil. Metric Sizing Matters for a Leak-Free Seal Nominal 1" tubing is cut for 25.4 mm North American barbs, so a true 25 mm hose tail sits slightly loose inside it and depends on the clamp alone to seal. This metric version matches the tail properly for a secure, leak-free joint. If your system uses standard North American fittings, our standard 1" kink free hose is the right choice instead. The tubing is rated from -26°C to 88°C (-15°F to 190°F) and handles Canadian shoulder-season installs without cracking. Inside Diameter 25 mm metric (nominal 1") Length 100 ft (30.5 m) Colour Black Fits 25 mm metric barbed fittings and hose tails Construction Smooth interior for maximum flow, ribbed exterior for crush resistance Temperature Range -26°C to 88°C (-15°F to 190°F) Suggested Max Pump Flow 1,200 GPH (4,542 LPH) MPN MNK10B How to Use Cut squarely with a utility knife, soften the end in hot water, and push it fully onto the 25 mm barbed fitting. Secure every connection with a stainless steel hose clamp before burying or concealing the run. Ideal for metric-plumbed ponds and waterfall features running pumps up to about 1,200 GPH (4,542 LPH).