AIRTAC HI-CAPA / SSP / SSP5 TO M4 HPA INJECTION MOULDED ADAPTOR

Requires donor gas magazine Injection moulded using a highly impact-resistant polycarbonate blend, this is the highest quality Hi-Capa to M4 adapter on the market. Key Features US HPA Fitting as Standard Lifetime Warranty BB retention mechanism to reduce BB loss during magazine changes Adapter Magwell included (Removable) Single Stack to ensure reliable feeding Magazine Screw included (To fit 2.5mm Allen Key) Multiple rear shims to fit a variety of magazines Gas Magazine Compatibility Compatible with most Hi-Capa 5.1 style magazines, including WE, Tokyo Marui, Novritsch Raven, Vorsk and Tokyo Marui (If magazine uses screw not pins). When paired with the magazines above, this adapter will work with nearly all airsoft Hi-Capas. AEG Magazine Compatibility We recommend the use of a PTS brand magazine such as EPM-LR, EPM1RX, EPM-1, EPM1S. Many other brands of magazine will work. If a magazine does not fit, you can swap the rear shim at the back of the adapter. DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE AIRTAC Adapters Each of our adapters is designed to be low profile while reaching field limit FPS. We design and manufacture all of our products to the highest standard, and do not charge extra for ‘premium’ features. Where applicable this adapter features: Lifetime Warranty (Our adapters have to be built to last) Injection moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS. CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability. Tuneability/compatability via integrated shim systems. Our adapters are designed to cope with 'airsoft tolerances' Gas Routers injection moulded from NBR, 1:1 with the factory gas router. We test every HPA adapter we sell Seal Test Firing test, for feed and recoil (we have over 100 guns on site for testing) Lubrication and Sealing This HPA Adapter is made of polycarbonate. One of the most impact resistant plastics. When sealing your adapter use only 100% silicone oil. Silicone oil mixed with petrochemical solvents (often 'spray-on' type), or superglue / cyanoacrylate, will destroy the polycarbonate. Your adapter will last a lifetime if you use only silicone oil. If for any reason you need to attach something to your adapter, use an adhesive compatible with polycarbonate such as "Loctite Super Glue All Plastics" Compact MP5 M4 Adapter Information Injection moulded from polycarbonate, this magwell is near indestructible! Compatible with most airsoft M4 magazines. We recommend EPM1/EPM1s magazines as they have excellent fitment and strong springs. Magazines advertised as Fast Feed such as the original EPM or Amarok magazines will also work well BB retention means only 2-3 BBs are dropped when changing mag A swappable rear shim is included Please note only 2 screws are required to attach the modular magwell, some adapters may have more