Aluminum RV Floor Register with Removable Vent Cover

The aluminum RV floor register is a replacement heating vent for 2x10, 4x8, or 4x10-inch floor openings. It combines a powder-coated aluminum register with a removable magnetic cover that helps keep pet hair, dust, and small dropped items out of the vent while the heater is off. Premium Rustproof Aluminum Build Crafted from heavy-duty aluminum with a sleek powder-coating finish, this RV floor register is designed to resist rust, scratches, and warping during normal RV use, offering a more rigid replacement for compatible plastic vents. Clean, Pet-Safe Design with Cover The removable cover has six embedded iron inserts that align with six magnets on the register base. Snap it on while the heater is off to help block pet hair, dust, and falling items from entering the vent. Easy On, Easy Off Convenience Before operating the heater, lift off the cover and store it in the included storage bag. Snap it back into place only after the heater is turned off. Thoughtful Reminder Label Included Place the included reminder label near the RV heater switch as a prompt to remove the cover before turning on the heat, helping warm air flow freely. A Durable Upgrade for RV Interiors This aluminum register provides a clean, practical replacement for a compatible RV floor vent. It is available for 2x10, 4x8, and 4x10-inch nominal floor openings in Brown, Black, or Gray and in 1-pack or 2-pack quantities. Choose the Correct RV Floor Register Size Order by the floor opening size, not the outside faceplate size. Measure the opening before selecting a variant, then confirm both the drop-in and overall dimensions. Nominal opening size Drop-in dimensions Overall faceplate dimensions 2x10 inch 2-1/4 x 10-1/8 inch 4 x 12 x 1 inch 4x8 inch 3.7 x 7.8 inch 5.2 x 9.8 inch 4x10 inch 3.7 x 9.7 inch 5.2 x 11.4 inch Dimensions are based on the supplied product measurement materials. Allow for normal measuring tolerance and verify the opening before ordering. How to Measure Before Ordering Remove the existing register if possible. Measure the length and width of the floor opening itself. Choose the matching nominal opening size: 2x10, 4x8, or 4x10 inch. Compare the listed drop-in dimensions with the opening. Check that the overall faceplate has enough clearance around the opening. Select the preferred color and 1-pack or 2-pack quantity. Usage Scenarios Suitable for compatible RV, camper, travel trailer, and motorhome floor heating vents. Useful in pet-friendly RVs to help keep fur and small objects from entering the vent while the heater is off. Helps maintain a cleaner, more organized interior during road trips and seasonal storage. Remove and store the cover whenever the heating system is operating. Important Heater Safety Use the magnetic cover only when the heater is off. Remove the cover before turning on the heater so warm air can flow freely. Never operate the heating system with the floor register blocked. Store the removed cover in the included bag until the heater is off again. Frequently Asked Questions Does 2x10, 4x8, or 4x10 refer to the outside dimensions? No. The variant size identifies the nominal floor opening. The outside faceplate is larger, so use the size table to confirm both the drop-in and overall dimensions. Can the magnetic cover stay on while the heater is running? No. The cover is for use only while the heater is off. Always remove it before operating the heater. Is this an underbody vent cover? No. This product is an interior RV floor register for a compatible heating-vent opening. Measure the floor opening before ordering. What colors and pack quantities are available? The product is offered in Brown, Black, and Gray, with 1-pack and 2-pack variants for each listed opening size. Will the color look exactly the same as it does on my screen? Color may appear slightly lighter or darker because of lighting, photography, and screen settings.