Chicago Pneumatic CPRC 2.5-50 Workshop Air Compressor (50L)

The Chicago Pneumatic CPRC 2.5-50 is a dual cylinder, belt-driven workshop compressor on a compact 50 litre tank. It runs on a standard 10 Amp power point, so most garages can use it without an electrical upgrade. Oil-lubricated240V 10 AmpStandard duty PowerPlugs into any standard household power point. No electrical work needed. WorkloadSuits regular use through the week. Fine for a single operator, not built for continuous all-day running. NoiseLouder than an oil-free unit. Better suited to a workshop than a customer-facing space. Air qualityOil-lubricated. Fit a filter and water separator before any tool used near paint or interiors. Best suited to Ideal for Single-bay detailing setups Home workshops with regular use Air tools, blow guns and tyre inflation Buyers wanting more output than oil-free on 10 Amp Not the right choice if You need a very quiet compressor You are running multiple tools simultaneously You need a large air reserve for continuous work What it can handle Application Suitability Blow gun / drying Comfortable Interior cleaning gun Suitable, though the 50L tank means more frequent cycling Tyre inflation Comfortable Air sander or polisher Suitable for shorter sessions Two tools at once Not recommended Tool and application suitability above is general guidance based on typical air consumption, not a performance guarantee. Actual results depend on your tools, air line setup, working pressure and how continuously you run them. If you are unsure whether this compressor suits your specific setup, get in touch before ordering. Before you order: The airflow figure below is pump displacement, not usable output. Fit a filter and water separator before any tool used near paint or interior surfaces. Specifications Specification Detail Motor 2.5 HP / 1.86 kW Pump displacement 10.1 CFM / 285 L/minThis is what the pump moves. Usable output at the tool is lower. Maximum pressure 10 bar / 145 psi Tank 50 litres Power supply 240V single phase, 10 AmpStandard household power point. Pump type Piston, oil-lubricated, belt-driven, dual cylinderBelt drive runs slower and cooler than direct drive. Weight 64 kg Dimensions (L x W x H) 840 x 380 x 810 mm Choosing the right option Choose this if you want workshop-grade output but only have a 10 Amp supply. Step up if the 50L tank cycles too often. The CPRC 3-100 doubles the reserve, though it needs 15 Amp. Consider instead the Whisper 2-50 if noise or oil contamination is a concern. Common questions Does it run on a normal power point?Yes, it draws 10 Amp so a standard outlet works.Why is it louder than the oil-free models?Belt-driven oil-lubricated compressors run louder by design. The trade-off is greater durability and higher output.Do I need a filter for detailing work?Yes. Oil-lubricated compressors can carry oil mist into the air line, so fit a filter and water separator before any tool used near paintwork.What maintenance does it need?Periodic oil changes and regular draining of tank condensate. Contact us for the manufacturer's recommended intervals. Planning a full compressed air setup? Plan Your Air Line Compare All Compressors