ESP32-S3 Pico Development Board, 16MB FLASH, 2MB PSRAM, Waveshare

ESP32-S3-Pico е компактна развойна платка, с форма и разположение на изводите като на Raspberry Pi Pico. Работи с ESP32-S3R2 микроконтролер, има множество GPIO портове и поддържа WiFi и Bluetooth 5 LE. Комплектът съдържа: Платка Waveshare ESP32-S3-DEV-KIT-N16R8 – 1бр. Важно: В комплекта няма USB-C кабел и няма конектори за GPIO портовете! Характеристики: Работи с ESP32-S3 R2 микроконтролер: ​240 MHz Xtensa 32-Bit LX7 Dual-Core Processor, Integrated 512KB SRAM, 384KB ROM PSRAM: 2 MB 2.4 GHz Wi-Fi (802.11 B/G/N) Supports Bluetooth 5 (LE) And Bluetooth Mesh On-board ceramic antenna Памет: 16 MB Flash Захранване: с 5V от USB-C портa или 3,3V/5V на обозначените изводи на платката Работно напрежение I/O портове: 3.3V, не толерира 5V USB-TTL конвертор CH343 и USB-HUB чип CH334 Има 27 GPIO порта и поддържа USB, UART, I2C, I2S, SPI, DAC и др. – PINOUT Raspberry Pi Pico съвместимо разположение на изводите Програмиране с Arduino IDE, с ESP-EDF, с MicroPython и др. Допълнителни: USB-C конектор, RGB светодиод, бутони за reset и boot Размери: 51mm x 21mm Допълнителна информация: Waveshare ESP32-S3-Pico. Подробно описание ESP32-S3-Pico Wiki. Ръководство, документация Pinout Схема Description EN Board specifications: Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Type-C connector, easier to use Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A 27 × multi-function GPIO pins Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-bit ~ 16-bit camera interface), LCD interfaces (8-bit ~ 16-bit parallel RGB, I8080, MOTO6800), etc. to achieve various functions flexibly Castellated module allows soldering directly to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development Pinout: Note: SPI, I2C, UART and other interfaces can be mapped to most GPIOs through the GPIO Matrix and IO MUX, see the ESP32-S3 datasheet for details. What’s On Board ESP32-S3R2 Xtensa 32-bit LX7 dual-core processor, with onboard 2MB PSRAM 2.4G monopole ceramic antenna W25Q128JVSIQ 16MB Flash memory BOOT button Press it when resetting to enter download mode RESET button CH334F USB HUB controller CH343P USB to UART chip MP28164 High efficiency DC-DC buck-boost chip USB Type-C port Power indicator Outline dimensions