Tuttio Soleil 01 Foot Lock

Keep your feet locked in and your ride locked down. The Soleil Supplies Foot Lock is a CNC-machined aluminum bracket-and-peg assembly that bolts directly into your existing peg mount points — no drilling, no fabrication. The swept arm positions a knurled grip peg at your heel, creating a natural foot stop that prevents your foot from sliding back during aggressive riding. More control, more confidence, every run. Compatible with the Tuttio Soleil 01 and Tuttio Soleil 01 SE. Available in chrome mirror polish or glossy black anodized with laser-engraved SOLEIL SUPPLIES branding. Each bracket is stamped L or R for foolproof installation. Buy one side or grab the pair. Specs Material: CNC machined aluminum Finish: Chrome (mirror polished) / Glossy Black (anodized) Compatibility: Tuttio Soleil 01, Tuttio Soleil 01 SE Mount: Bolt-on — uses existing peg mounting holes, no drilling required Peg: Knurled aluminum with black rubber end cap Side markings: L / R stamped on each bracket arm Installation Identify the correct side — each bracket is stamped L (Left) or R (Right). Match it to the side of the bike you're installing on. Remove existing hardware — take out the stock peg mounting bolt(s) from the desired side. Position the bracket — hold the foot lock bracket flat against the frame's peg mount and align all bolt holes. Thread in mounting bolts — start bolts by hand, then apply a drop of medium-strength thread locker (e.g. Loctite Blue 243). Torque to spec. Check the peg — the knurled grip peg is pre-threaded onto the bracket arm. Verify it's tight before riding. Confirm positioning — stand on the pegs in your normal riding stance. The arm should sweep downward and rearward behind your heel, creating a firm foot stop. Repeat for the other side if installing as a pair. ⚠️ Check hardware tightness after your first ride and re-torque if needed.