SONESSE 40 ZIGBEE 9/12 1246316 WITH INLINE CONNECTOR

Convenience: • Compatible with a wide range of interior window coverings. Easy Installation: • Seamless integration to match any décor: • 8mm motor head thickness for reduced light gap. • Recessed integrated motor head plate dependent on the bracket system. • Available with either 3m open cable or with inline connector (for ease of pre-wiring). Easy programming and adjustment with TaHoma® pro: • Installation and programming performed directly from the app: including intuitive step-by-step programming instructions. • LED feedback for easy troubleshooting and installation. • Acts as a Zigbee® mesh network router to extend radio range. • Dedicated after sales and remote maintenance tool, Serv-e-Go Reliability: • Highly secure protocol • Somfy Quality and Warranty Technical information End product End product type Tubular AC Motor with Zigbee technology Technology Radio Frequency 2.4 GHz (Zigbee) MHz Range in house 7m (Extendable with Zigbee Repeaters) Electrical Antenna External Antenna 17.5cm Consumption in standby mode 0.05 W Consumption during operation 120 W Rated current 0.522 A Nominal Voltage / Frequency AC - 230V/50HZ Mechanical Capacity of the limit switch unit 250 turns Type of limit switch unit Electronic & bi-directional radio Type of head ROUND Nominal Speed 12 rpm Nominal Torque 9 Nm Standard Approval RCM Protection Index IP 30 Insulation class II Cable Plug in cable In-line Connector Cable type VVF Wire section 0.75 mm² Color WHITE Wire Length 3m (includes approx. 210mm pigtail) m Number of wires of the cable 2 Dimension Diameter 40 mm Basic crown for tube diameter Tube Min Ø37 mm Length (L1) 535 mm Other Information An in-line connector cable must be installed by a qualified electrician in accordance with industry standard AS/NZS3000. You must turn off power to this cable before you connect or disconnect this motor. Power may only be supplied to this cable once male & female connectors are correctly coupled. Failure to do so could compromise personal safety. In-line connector for indoor use only. When installing the in-line connector to comply with AS/NZS 60335:1:2020 you must order & use an in-line connector housing ref.9015865. Installation/use of an exposed in-line connector is a safety risk. Thermal time 4 mn Noise level (according to Somfy measures) 40 dBA Working temperature 0°C to 60 °C Support Zigbee Mesh Network Summary Sonesse 40 AC Zigbee Technical Datasheet Sonesse 40 Zigbee AC Installation Guide (Full)