EverStrong ES20 High-Strength Contact Spray Adhesive Canister

High-Strength Contact Adhesive for Industrial Bonding EverStrong ES20 is a high-strength contact adhesive designed for industrial bonding applications that require fast tack, water resistance, and high-temperature performance. The web spray adhesive bonds a wide range of substrates, including decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, auto headliners, cork, and particle board. ES20 is available in clear or red and uses a non-chlorinated solvent formulation with no HAPS or ozone-depleting substances. Please Note: 13 oz can of ES20 spray adhesive is available. ES20 Features and Benefits High-Temperature Bonds: Delivers strong bonds with temperature resistance above 200°F. Fast Tack: Develops tack quickly for efficient bonding and assembly. Water Resistant: Provides reliable performance in applications exposed to moisture. Versatile Bonding: Bonds laminates, veneers, fiberglass, glass, upholstery, fabrics, foam, cork, and particle board. Web Spray Pattern: Provides even adhesive coverage across bonding surfaces. Non-Chlorinated Formula: Contains no HAPS or ozone-depleting substances (ODS). Specifications Brand: EverStrong Series: ES20 Available Canister Sizes: 9 lb Disposable, 30 lb Disposable, 140 lb Returnable, 300 lb Returnable Appearance: Liquid, Clear (Red Available) Specific Gravity: .70 - .80 g/cc Shear Adhesion: >100 psi and >200°F Spray Tip: ES6501 Spray Pattern: Web Spray Flammability: Flammable per ASTM E-681-04 Solvent: Acetone, Heptane Shelf Life: 15 months Freezing: This Product is Not Damaged by Freezing but Return to Room Temp Before Use Storage: After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F. Product Usage Apply EverStrong ES20 to both surfaces being bonded, using an even coat with 80% to 100% coverage on each surface. Allow the adhesive to dry for 2–4 minutes, or until tacky, then join the surfaces and apply even pressure across the entire bond area. Surfaces should be dry and free of dirt, grease, and oil, and both the adhesive and substrates should be at least 60°F (16°C) before application. For porous surfaces, apply a second coat after the first coat has dried and become tacky. Applications and Substrates Decorative Laminates Veneers Fiberglass Glass Upholstery Fabric Foam Auto Headliners Cork and Particle Board