Steel Braided Foot Brake Line for Moto Brakes | Surron Ultra Bee, Light Bee, Talaria, Eride Pro

A steel braided foot brake line for moto-style foot brake conversions on the Surron Ultra Bee, Surron Light Bee, Talaria and Eride Pro. Braided hose doesn't swell under pressure the way a rubber line can, so the pedal stays firm and consistent when you're standing on it through rough sections. Specs Stainless steel braid over a PTFE inner line Clear PVC outer jacket keeps dirt and grit off the braid M10 banjo fittings on both ends 90° banjo at the master cylinder and 28° banjo at the caliper, angled so the line clears the swingarm through full suspension travel Pre-cut and crimped, ready to install Fitment Surron Ultra Bee (foot brake setups) Surron Light Bee / LBX (moto brake conversions only) Talaria X3 (XXX) / MX3 / MX4 / MX5 (moto brake conversions only) Eride Pro S / Pro SS 1.0 / 2.0 / 3.0 / SR (moto brake conversions only) One line fits every bike on this list. It's made for moto-style calipers like the Ultra Bee caliper, not the stock MTB-style caliper that comes on the Light Bee, Talaria or Eride Pro. Install Notes Use fresh copper crush washers on both banjo bolts. Bleed the system with the brake fluid specified for your master cylinder. Check pedal feel and line routing at full suspension compression before you ride. Build Out Your Moto Brake Setup Steel Braided Rear Hand Brake Line Surron Ultra Bee Foot Brake Mount Bracket Talaria Foot Brake Mount Bracket (MX3 / MX4 / MX5) Moto Brake Dual Caliper Bracket 240mm Floating Moto Brake Rotor In stock and ships from the USA.