Permacrylik Matt Metallic Acrylic Paint Colours

Permacrylik Matt Metallic Acrylic Paint Bring metallic colour to murals, signwriting and scenic decoration with PERMACRYLIK® Matt Metallic Acrylic Paint. This water-based acrylic range from Colormaker Industries is designed for architectural features, installations, theatre scenery, film and TV sets. From painted lettering to a decorative backdrop, choose from five metallic and pearl colours to complement your project. The PERMACRYLIK Scenic & Signwriting range offers vibrant colour, low VOC content and water clean-up while the paint is still wet. Metallic Colours and Pack Sizes Metallic Antique Gold Metallic Copper Metallic Pearl White Metallic Silver Metallic Yellow Gold Available sizes: 300ml, 1L and 4L. Use the colour chart in the Downloads section as a guide. Actual colours may vary from the chart and between batches, so confirm colour suitability before application. For Murals, Signwriting and Scenic Painting The manufacturer's Scenic & Signwriting range is suitable for interior and exterior walls and ceilings, indoor and outdoor murals, installations and set decoration. Suitable substrates include plasterboard, plaster, hardboard, cement, brick, canvas, timber, metal and glass, with preparation and priming appropriate to the surface. Application, Coverage and Drying Times Application: brush, roller or airless spray. Coverage: approximately 8–10m² per litre per coat, as a theoretical guide for the range. Coats: apply a minimum of two even coats. Touch dry: 20–30 minutes at 25°C and 50% relative humidity. Recoat: allow 2–4 hours at 25°C and 50% relative humidity. Cooler or more humid conditions require longer drying times. Clean-up: wash equipment with water immediately after use, while the paint is still wet. Keep washings out of drains and waterways. Preparation and Important Use Notes Ensure surfaces are clean, sound and suitably prepared. Use the primer recommended for your substrate in the Application Guide, and stir the paint thoroughly before use. Do not apply in damp or rainy conditions, when rain is forecast within three days, in direct sunlight on hot days, above 35°C, below 15°C ambient temperature or below 12°C surface temperature. Do not apply if temperatures are forecast to fall below 12°C within one day. The range has poor burnish resistance and is not suitable for surfaces subject to vehicle traffic. The technical figures above are guidance for the PERMACRYLIK Scenic & Signwriting range. Read the product label, Technical Data Sheet and Application Guide in the Downloads section before use, including surface preparation, application conditions and safety precautions. Explore the other PERMACRYLIK Scenic and Glow paint colours for additional colour options.