Designer AntiGlare Series

‹ › Designer AntiGlare Series Recessed COB downlight engineered for clean, comfortable, glare-free illumination across residential and commercial interiors. Its deep anti-glare reflector cuts direct glare to a 30-degree shielded angle. Rated IP65 for damp and wet areas, including bathrooms, showers, and covered exteriors. Available in 3-inch and 4-inch sizes with an adjustable 5CCT switch and remote junction-box driver. 12W – 20W 2700K – 6000K 5CCT Ra80 / Ra90 IP65 30° Anti-Glare 3" & 4" ETL Listed Download Spec Sheet Highlighted Features IP65 Rated Protected against dust and water jets, suitable for damp and wet locations including bathrooms, showers, and covered exteriors. Anti-Glare Reflector Deep reflector with a 30-degree shielded cutoff for comfortable, low-glare light in any occupied space. COB LED High-quality chip-on-board LED for crisp, uniform, high-output illumination. 5CCT Selectable Adjustable switch covering 2700K, 3000K, 3500K, 4000K, and 5000K in one fixture at install. High Color Rendering Available in Ra80 or Ra90 for accurate, true-to-life color reproduction. Selectable Beam Angle 15°, 24°, 36°, and 45° options to match accent, task, or ambient lighting needs. Reflector Finishes Matte Black, Matte Silver, Shiny Silver, and Shiny Black optical reflectors. Remote Driver Separate junction-box driver for a clean, low-profile install and straightforward servicing. Durable Housing Aluminum body for efficient heat dissipation and a rated 50,000-hour lifespan. Dimmable Fully dimmable for adjustable light levels across all wattage configurations. Wide Voltage Range Operates on 100 to 130V or 100 to 277V, with 100 to 347V optional. Certifications ETL, Energy Star, IC Rated, Airtight, Wet Location, FCC. How to Order Build your product code by selecting a model size and reflector color. The example below shows a complete code and how each segment maps to a specific option. C&C-LP-3C1035 Model – 2 Size code – 7 Wattage – MB Reflector Model C&C-LP-3C1035 3-inch, 12W / 15W C&C-LP-4C1035 4-inch, 15W / 20W Voltage 100 to 130V Standard 100 to 277V Standard 100 to 347V Optional Reflector MB Matte Black MS Matte Silver SB Shiny Black SS Shiny Silver Beam Angle 15° Narrow accent 24° Focused task 36° General ambient 45° Wide ambient For full technical specifications, photometric data, and dimensional drawings, download the product spec sheet. Download Spec Sheet More About the Designer AntiGlare Series Specifications at a Glance LED type COB (chip-on-board) Models and wattage LP-3C1035 (3-inch, 12W / 15W), LP-4C1035 (4-inch, 15W / 20W) Beam angles 15°, 24°, 36°, 45° Anti-glare shielded angle 30° Color rendering Ra80 or Ra90 Color temperature 2700K to 6000K, 5CCT selectable (2700K / 3000K / 3500K / 4000K / 5000K) Efficacy 90 lm/W Input voltage 100 to 130V, 100 to 277V (100 to 347V optional) IP rating IP65 (dust-tight and water jet protected) Dimming Fully dimmable Rated lifespan 50,000 hours Driver Remote junction-box driver (separate from fixture) Housing Aluminum body Reflector finishes Matte Black, Matte Silver, Shiny Black, Shiny Silver Certifications ETL, Energy Star, IC Rated, Airtight, Wet Location, FCC Dimensions Model Outer diameter Height Cutout Wattage LP-3C1035 84 mm (3 3/8") 65 mm (2.5") 75 mm (3") 12W / 15W LP-4C1035 104 mm (4 1/8") 70 mm (2 3/4") 95 mm (3 3/4") 15W / 20W Remote Driver Dimensions Dimension Value Driver size 150 × 50 mm (5 7/8" × 2") Driver height 33 mm (1 3/8") With cable 225 mm (8 7/8") length including lead wire IP65 Rating — What It Means IP65 is an international ingress protection rating. The first digit (6) means the fixture is fully dust-tight. The second digit (5) means it is protected against water jets from any direction. In practical terms, this means the Designer AntiGlare Series can be used in bathrooms, showers, saunas, covered terraces, and other damp or wet locations where a standard downlight would not be suitable. It is also well suited to kitchens and areas where cleaning with water spray is common. How the Anti-Glare Design Works The COB LED sits deep inside a cone-shaped reflector. The depth of the reflector creates a 30-degree shielded cutoff angle, meaning the LED source is hidden from view for anyone standing or seated at normal sightlines. Light is directed downward rather than toward the eyes. This makes the fixture comfortable for prolonged use in homes, offices, hospitality spaces, and retail environments where glare from overhead lighting would otherwise cause eye strain. Remote Driver — Why It Matters Most recessed downlights have the driver built into the fixture body, which adds bulk to the ceiling cavity and can make servicing difficult. The Designer AntiGlare Series uses a separate remote driver that mounts inside the junction box instead. The fixture itself is smaller and neater in the ceiling aperture. The driver can be replaced without disturbing the ceiling finish. The remote driver is particularly useful in tight ceiling cavities or where access space is limited. Choosing the Right Beam Angle 15°: Very narrow, for accenting art, objects, or architectural details from a distance. 24°: Focused beam for accent and task lighting in retail, galleries, and kitchens. 36°: Medium spread for general ambient lighting in most rooms. 45°: Wide spread for broader coverage in open or lower-ceiling spaces. The narrow beam options (15° and 24°) suit accent applications where you want a defined pool of light. The wider options (36° and 45°) work better for general ambient coverage with fewer fixtures. Choosing the Right Color Temperature 2700K: Warm white, cozy and inviting, ideal for living rooms, bedrooms, and hospitality. 3000K: Soft white, warm but slightly crisper, popular for kitchens and retail. 3500K: Neutral white, balanced and versatile, suits offices and multi-purpose spaces. 4000K: Cool white, clean and alert, common in commercial and healthcare environments. 5000K: Daylight, bright and energizing, suited to task-heavy commercial and utility areas. The 5CCT switch lets you set the color temperature at install, so you can use one SKU across an entire project and adjust per room without stocking multiple fixtures. Where to Use It and Layout Tips Bathrooms and showers: IP65 rating makes it safe for wet zone use. Kitchens: Focused task lighting over counters, islands, and prep areas. Living rooms and bedrooms: Warm CCT with dimming for comfortable ambiance. Retail and galleries: Narrow beam angles highlight merchandise and artwork with low glare. Hospitality spaces: Anti-glare design and warm reflector finishes create a refined, comfortable environment. Covered exteriors: IP65 suits sheltered outdoor areas such as porches and carports. For general ambient lighting, a 36° or 45° beam at roughly half the ceiling height in spacing gives even coverage. For accent use, position the fixture so the beam center lands on the object being highlighted and choose the narrowest beam angle that covers it cleanly. Dimming and Installation Notes Use a dimmer rated for LED loads and confirm compatibility before installation. The remote driver mounts in the junction box. Mount the driver first, then connect the fixture lead wire. Ceiling cutout: 75 mm for the 3-inch model, 95 mm for the 4-inch model. Fixture height: 65 mm (3-inch) and 70 mm (4-inch). Confirm sufficient ceiling cavity depth before cutting. Installation should be completed by a qualified electrician in accordance with local electrical codes and wet-location requirements where applicable. Frequently Asked Questions Can I use this in a shower? Yes. The IP65 rating makes it suitable for wet locations, including shower enclosures. Follow local electrical codes for wet zone installation. What is the difference between 12W and 15W on the 3-inch model? The LP-3C1035 is available in both 12W and 15W. The 15W variant delivers higher lumen output for larger or brighter applications. Check the spec sheet for per-wattage lumen figures. Why is the driver separate? A remote driver reduces the fixture's ceiling footprint, makes servicing easier, and allows installation in tighter ceiling cavities where a built-in driver would not fit. What does the 30-degree shielded angle mean? It means the LED source is hidden from direct view for anyone standing or seated more than 30 degrees from directly below the fixture. This prevents glare and keeps the light comfortable in occupied spaces. Is it suitable for new construction and remodels? Yes. The remote driver design and standard ceiling cutout sizes make it compatible with both new construction ceiling boxes and retrofit installations.