Liquid Metallic Jedi Pink PPF | Self-Healing TPU Film

Liquid Metallic Jedi Pink is a deep, saturated pink with a fine metallic shimmer that shifts as the light moves across your panels. In bright sun it reads bright and electric. Under cloud or street light it pulls darker and richer, almost rose. It is the kind of color that turns heads at a meet and still looks clean parked outside your house. This is not a sticker. It is colored paint protection film, so the same layer that gives you the metallic pink finish also shields your factory paint from rock chips, road grit, light scratches, and bug acid. You change the whole look of the car and guard the paint underneath at the same time, all in one film. Key features Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun. Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer. Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving. Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film. Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking. Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel. Removable adhesive: peels off cleanly with heat, with no glue residue left behind. Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges. The Wrapteck 3-layer TPU structure Specifications Material TPU (thermoplastic polyurethane) Thickness 7.5mil (330 ± 10µm) Structure 3 layers Raw material Lubrizol TPU resin Adhesive Ashland acrylic adhesive Topcoat Cashew-based coating Application Wet install Roll width 1.52m (5ft) Roll lengths 3m, 6m, 9m and 15m Warranty 2 years Expected service life Up to 8 years Lab test report Performance level Premium Material TPU—Thermoplastic Polyurethane Elastomer Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels Adhesive thickness 30μm Adhesive Henkel solvent-based Acrylic-based, repositionable, slidable Adhesive type Pressure-sensitive Texture Effect Anti-scratch Color TPU PPF Car Surface Protection Film Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves Removability Removable with heat Elongation Along: min. 130%, Across: min. 150% Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where Maybe you want to know PPF, TPU, and TPH: What Each One Does and Which One Your Car Needs Does PPF Yellow? What Causes It and How to Keep Film Clear Vinyl Wrap vs PPF: Which One Your Car Needs, and When PPF vs Vinyl Wrap: Cost, Protection and Which to Choose New to wrapping? If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.