Orange Topographic Vinyl Wrap – Black Universal Partial Wrap

This orange topographic vinyl wrap puts bright copper-orange contour lines on a solid black background – a bold, high-contrast map pattern for vans, trucks, 4x4s and campers. It comes as a single printed sheet in the size you choose: position it, trim it to your panel and get a partial-wrap look without paying for a full vehicle wrap. Design: Orange topographic contour lines on a solid black background (no fade) Custom fit: Universal – supplied as a rectangular sheet to trim on the vehicle Sizes: Height 400 / 600 / 800 / 1000 mm × width 1000 to 3000 mm (200 mm steps) – choose at checkout Material: ORAJET 3551RA printed air-release vinyl Protection: Laminated for UV, weather and scratch resistance Finish: Matte or glossy laminate – choose at checkout Durability: 5–7 years outdoor life under normal conditions Installation: Dry application recommended – trim excess vinyl on the vehicle during fitting Use: Waterproof, suitable for outdoor and indoor application Where it works best On this orange topographic vinyl wrap, the black base hides road grime and blends into black trim, bumpers and arches, while the orange lines stand out on white, grey, silver and black paint. Popular placements are lower door panels and rocker areas, bonnets, tailgates, camper side panels and trailer fronts. As a black and orange topographic wrap it also pairs well with orange recovery boards, roof racks and accessories. Please note: Dimensions are listed as height × width. What's included: 1 × printed and laminated orange topographic vinyl wrap sheet in your selected size and finish. Wrapping both sides of a vehicle? Order two sheets. Need a size that isn't listed? Send us a message and we'll print it to fit your project. Colours may look slightly different depending on your screen and lighting – photos on real vehicles are the most accurate representation. Installation tips Clean and degrease the surface before fitting. Position the graphic with masking tape, apply it gradually with a squeegee from the centre outwards, and trim excess vinyl around panel edges, doors and body lines. For larger sizes (800 mm height and above), a second person makes installation much easier. Prefer a softer look? See the Universal Topographic Partial Wrap with a black-to-grey fade.