Pro Sandblast Kit – Gravity Fed Carbide Pro (600 Bar)

The Complete Wet Sandblasting System — Delivery and Nozzle in One Kit If you're pricing out blast cabinets, compressor rentals, or industrial pots just to strip rust and coatings — stop. The SandBlastKit Pro™ Gravity Fed Carbide Pro (600 Bar) is the complete two-in-one system: the full PVC Gravity-Fed Delivery System plus the new Carbide 600 nozzle. Everything you need to turn the pressure washer you already own into a professional wet sandblasting rig. Built with a 150 lb gravity-fed PVC media bag, patent-pending metering sleeve valve, and precision air assist, this system feeds abrasive media downward naturally — like an hourglass — so your washer only needs a little pull to maintain a perfect, steady feed. That's why it works on everything from a small electric washer to a 10,000 PSI commercial rig. No sputtering, no clogs, no shaking a bucket. The Carbide 600 nozzle is rebuilt from the ground up: a wider internal mixing chamber pulls a stronger vacuum, putting more media on the surface with every pass — and the carbide build holds its edge through long, sustained-pressure sessions. Fewer passes to bare metal. And when the job changes, the same bag accepts any of our ceramic or carbide nozzles with a quick swap. No compressor required. Engineered in the USA. Why Choose the Gravity Fed Carbide Pro (600 Bar)? ✓ Two-in-One Complete Kit — Full PVC gravity-fed delivery system plus the Carbide 600 nozzle. Nothing else to buy — connect to your pressure washer and start blasting. ✓ Carbide 600 Nozzle — More Material Off Per Pass — Wider internal mixing chamber creates stronger vacuum pull for more impact per hit and fewer passes to bare metal. ✓ Rated to 600 Bar of Sustained Pressure — Carbide construction holds its performance through long sessions without wearing down or needing mid-season replacement. ✓ Works with ANY Pressure Washer — Electric or gas, 1,500–10,000 PSI. Gravity and air assist do the work, so even small washers deliver a perfect feed. ✓ Gravity-Fed Media Delivery — Abrasive media feeds down naturally like an hourglass. No shaking, no scooping, no stopping mid-job. ✓ Patent-Pending Metering Sleeve Valve — Dial in your exact media flow with a quarter turn. It locks in and holds — no surging, no dry patches. ✓ Precision Air Assist — Air inlet keeps media moving smoothly through the system for consistent flow from first trigger pull to last. ✓ Holds Up to 150 lbs of Media — Blast for hours without refilling. Hang the bag from a truck rack, scaffold, or fence post and move it with you across the job. ✓ Interchangeable Nozzle System — The included bag works with every SandBlastKit Pro nozzle — ceramic, Carbide 500, Carbide 600. Upgrade or swap anytime without replacing the system. ✓ No Air Compressor Required — Powered entirely by your pressure washer. No cabinet, no rental fees. ✓ Built for Real Restoration Jobs — Rust removal, paint stripping, coating removal, concrete etching, graffiti removal, trailers, frames, boat hulls, heavy equipment, and metal surface prep. Specifications Product Type Complete Gravity-Fed Wet Sandblasting Kit (Delivery System + Carbide 600 Nozzle) Nozzle Carbide 600 — rated up to 600 bar sustained pressure Nozzle Design Wider internal mixing chamber for stronger vacuum pull and increased media output per pass Flow Style Gravity-fed abrasive media delivery Media Control Adjustable patent-pending metering sleeve valve Assist System Precision air assist inlet Media Capacity Holds up to 150 lbs of abrasive media Hose Type Reinforced blue media hose — 14 ft upgraded Nozzle Compatibility Bag accepts all SandBlastKit Pro ceramic and carbide nozzles — fully interchangeable Pressure Washer Compatibility Electric and gas pressure washers, 1,500–10,000 PSI Compressor Required No air compressor required Media Compatibility Crushed glass, garnet, coal slag (Black Beauty), iron oxide, soda, and other suitable dry blasting media Use Case Rust removal, paint stripping, coating removal, concrete and masonry cleaning, graffiti removal, metal surface preparation Design Status Patent pending Engineering Designed and engineered in the USA What's in the Box? 1× Carbide 600 Nozzle (600 Bar) 1× PVC Gravity-Fed Media Bag 1× Patent-Pending Metering Sleeve Valve 1× Precision Air Assist Inlet 1× 14ft Upgraded Hose 1× Step-by-Step Setup & Blasting Guide