Backwoods Toyota Tacoma Bed Rack - DRIFTR Topper (Add-on)

Add a Roof Rack on Top of Your Bed Rack. Backwoods DRIFTR Topper. Clears the cab for wedge-style tents. 6 triple slotted extrusions. 0.25" aluminum side rails. Requires the Backwoods DRIFTR Bed Rack This Topper is an add-on. It mounts on top of the Backwoods Adventure Mods Toyota Tacoma DRIFTR Bed Rack (2005-2026), which is sold separately and required for the Topper to work. The Topper cannot be used standalone. The Backwoods Adventure Mods DRIFTR Topper essentially adds an entire roof rack on top of your truck's bed rack. If you need additional height to clear the cab of your Tacoma because of a longer, wedge-style rooftop tent, this is how you achieve that. Without the Topper, the DRIFTR Bed Rack is flush or nearly flush with the cab. With the Topper installed, your tent platform rises above the cab roofline, giving wedge-style and larger clamshell tents the clearance they need to open fully without hitting the cab. When paired with the Backwoods DRIFTR Roof Rack on the cab, you get a super solid, even level deck from the front of your truck to the back. The Topper features 0.25" thick aluminum side rails, 6 triple slotted extrusions for mounting gear, side rail handle cutouts (also compatible with Agency 6 Handles), and a free powder coat finish. Fits the short bed Tacoma across 2nd Gen (2005-2015), 3rd Gen (2016-2023), and 4th Gen (2024-2026). Free shipping to the lower 48. Lifetime Warranty. 0.25" Thick Aluminum Rails 6 Triple Slotted Extrusions 3 Gens 2nd, 3rd, 4th Gen Tacoma Lifetime Warranty Clears the Cab for Wedge-Style Tents The primary purpose of the DRIFTR Topper is raising your tent platform above the cab roofline. Without it, the DRIFTR Bed Rack sits flush with the cab. Wedge-style (clamshell) rooftop tents that hinge from the rear need clearance above the cab to open fully. The Topper provides that clearance. It also gives you a level mounting surface that sits higher than the cab, which is ideal for longer tents that overhang the bed rack toward the cab. If you run a compact hardshell tent that does not need cab clearance, you may not need the Topper at all. 0.25" Aluminum Side Rails. 6 Extrusions. The Topper is built with the same materials and construction quality as the DRIFTR Bed Rack itself. Super strong 0.25" thick aluminum side rails with handle cutouts make it easy to grab and adjust. The handle cutouts are also compatible with Agency 6 Handles (not sold through us) for an upgraded grip. Six triple slotted extrusions provide the mounting surface for rooftop tents, gear, and accessories. The free powder coat finish matches the bed rack below for a clean, cohesive look. This is a DRIFTR roof rack that happens to sit on top of a bed rack instead of on a vehicle's cab. More Features Level Deck with DRIFTR Roof Rack: When paired with the Backwoods DRIFTR Roof Rack on the cab, the Topper creates a level deck from the front of your truck to the back. This continuous flat surface opens up build possibilities that are not possible with a bed rack and cab rack at different heights. Easy Mounting: The Topper mounts directly on top of the DRIFTR Bed Rack. If you already have the bed rack installed, adding the Topper is straightforward. Optional Accessories: Awning mounts, Dogbone traction board mounts, and deck panels are available as add-ons to expand the Topper's functionality further. Agency 6 Handles (sold through Agency 6 directly) drop into the side rail handle cutouts for an upgraded grip. Specifications Product Type Add-on for the Backwoods DRIFTR Bed Rack (sold separately, required) Fitment Short bed Toyota Tacoma: 2nd Gen (2005-2015), 3rd Gen (2016-2023), 4th Gen (2024-2026) Side Rail Thickness 0.25" aluminum Extrusions 6 triple slotted Side Rail Handle Cutouts Yes (compatible with Agency 6 Handles) Finish Free powder coat (matches DRIFTR Bed Rack) Shipping Free to lower 48 states Warranty Lifetime Optional Accessories Awning Mounts Available Dogbone Traction Board Mount Available Deck Panels Available Agency 6 Handles Compatible (sold through Agency 6) Pros Solves the cab clearance problem for wedge-style and larger rooftop tents on bed rack setups 0.25" thick aluminum side rails match the build quality of the DRIFTR Bed Rack 6 triple slotted extrusions provide ample mounting surface for tents, gear, and accessories Creates a level deck when paired with the DRIFTR Roof Rack on the cab Fits all short bed Tacoma generations (2nd, 3rd, 4th Gen, 2005-2026) Free powder coat and free shipping to the lower 48 Lifetime Warranty from Backwoods Adventure Mods Cons Requires the Backwoods DRIFTR Bed Rack (sold separately). This Topper cannot be used on its own or on a different brand's bed rack Adds height to your overall truck profile. Factor this into garage clearance and overhead obstacle calculations Frequently Asked Questions Do I need the DRIFTR Bed Rack to use this Topper? Yes. The DRIFTR Topper is an add-on that mounts on top of the Backwoods Adventure Mods Toyota Tacoma DRIFTR Bed Rack. The bed rack is sold separately and is required for the Topper to function. The Topper cannot be used standalone or on a different brand's bed rack. Do I need the Topper if I have a compact hardshell tent? Not necessarily. If your rooftop tent is a compact hardshell that opens vertically (pop-up or dual clamshell) and does not need clearance above the cab, the DRIFTR Bed Rack alone may be sufficient. The Topper is primarily needed for wedge-style (clamshell) tents that hinge from the rear and need height above the cab to open fully, or for longer tents that overhang toward the cab. If you are unsure, call us at 844-200-3979 with your tent model and we will tell you if you need the Topper. What Tacoma generations does the Topper fit? The Topper fits the short bed Toyota Tacoma across all three recent generations: 2nd Gen (2005-2015), 3rd Gen (2016-2023), and 4th Gen (2024-2026). It requires the generation-appropriate DRIFTR Bed Rack underneath. What is the level deck feature? When you pair the DRIFTR Topper (on the bed rack) with the Backwoods DRIFTR Roof Rack (on the cab), you get a continuous, even, level deck from the front of your truck to the back. This means the cab rack and the bed rack Topper sit at the same height, creating one flat surface across the entire length of the vehicle. This is ideal for large overlanding builds where you want a unified platform for gear, tents, and accessories from front to rear. Are the handle cutouts useful? Yes. The side rail handle cutouts serve as grab points when loading gear, adjusting the tent, or climbing up to access the rack. They are also compatible with Agency 6 Handles, which are aftermarket aluminum handles that drop into the cutouts for an upgraded, more comfortable grip. Agency 6 Handles are sold through Agency 6 directly, not through us. Complete Your Build DRIFTR Bed Rack - Required for this Topper (sold separately) Roof Top Tents - Mount a tent on the Topper Awnings - Add shade with awning mounts Tacoma Accessories - Build out your rig Questions About the DRIFTR Topper? We will help you figure out if you need the Topper for your tent and plan your full Tacoma build. 844-200-3979