PBB2P-120W-IEC-12V - AC/DC Din Rail Power Supply with IEC Input

120W Series DIN rail power supply series is designed for cost sensitive users who need to fulfill essential features needed for many general industrial applications, without compromising on quality and reliability. The convection-cooled PBB2P 120W Series will operate full power from -30°C to +50°C, then de-rating up to +70°C at 230 Vac. It can operate in constant current mode, making it suitable for inductive and capacitive loads. Features 120W output power 12/24/48 Vdc output voltages Universal AC input voltage range Built-in constant current circuit for reactive loads Operate from -30°C to +70°C with -40°C Cold Start Reduced no-load power consumption INPUT Model Number PBB2P-120W-IEC-12V PBB2P-120W-IEC-24V PBB2P-120W-IEC-48V Input Voltage Range 90-264 Vac Nominal Input Frequency 50-60 Hz Input Current 2.1 A typ. @ 115 Vac, 1.3 A typ. @ 230 Vac Efficiency at 100% Load 86% typ. @ 230 Vac 88.5% typ. @ 230 Vac 89.5% typ. @ 230 Vac Leakage Current < 0.5 mA @ 240 Vac OUTPUT Model Number PBB2P-120W-IEC-12V PBB2P-120W-IEC-24V PBB2P-120W-IEC-48V Output Voltage 12 Vdc 24 Vdc 48 Vdc Output Voltage Adjustment Range 10.8 - 13.2 Vdc 21.6 - 26.4 Vdc 43.2 - 52.8 Vdc Output Current 10.0 A 5.0 A 2.5 A Output Power 120 W max Line Regulation ± 0.5% @ 115 Vac & 230 Vac PARD (20MHz) < 120mVpp @ 0°C to +70°C < 360mVpp @ -30°C to 0°C < 150mVpp @ 0°C to+70°C < 450mVpp @ -30°C to 0°C < 200mVpp @ 0°C to+70°C < 600mVpp @ -30°C to 0°C Hold-up Time 10 ms typ. @ 115 Vac (100% load) 16 ms typ. @ 230 Vac (100% load) MECHANICAL Model Number PBB2P-120W-IEC-12V PBB2P-120W-IEC-24V PBB2P-120W-IEC-48V Case Cover / Chassis SGCC / Aluminum Dimensions (H x W x D) 151 x 46 x 159 mm (5.94 x 1.81 x 6.26 inch) Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715 Input Connector IEC Socket (with 2M IEC power cable) Output Connector 4 Pins (Rated 300 V / 20 A) Wire Output AWG 18-12 (Current rating can refer to “AWG Wire Table”) Unit Weight 0.53 kg (1.17 lb) ENVIRONMENTAL Model Number PBB2P-120W-IEC-12V PBB2P-120W-IEC-24V PBB2P-120W-IEC-48V Operating Temperature -30°C to +70°C (-40°C Cold Start) Storage Temperature -40°C to +85°C Power De-rating > 40°C de-rate power by 1.67 % / °C @ 115 Vac > 50°C de-rate power by 2.5 % / °C @ 230 Vac Cooling System Convection Operating Humidity 20 to 90% RH (Non-Condensing) Operating Altitude 0 to 5,000 Metres (16,400 ft.) PROTECTIONS Model Number PBB2P-120W-IEC-12V PBB2P-120W-IEC-24V PBB2P-120W-IEC-48V Overvoltage < 17.4 V, SELV Output, Latch Mode < 33.6 V, SELV Output, Latch Mode < 64.8 V, SELV Output, Latch Mode Overload / Overcurrent 105 - 150% of rated load current, Auto-recovery Continuous current limit Mode (Vo > 80%) Over Temperature Latch Mode Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) Protection Against Shock Class I with PE connection Galvanic Isolation Input to Output - 3.0 KVac Input to Ground - 2.0KVac Output to Ground - 1.0KVac RELIABILITY DATA MTBF Telcordia > 700,000 hrs | SR-332 I/P: 115 Vac & 230 Vac, O/P: 100% load, Ta: 25°C Expected Cap Life Time 10 years (230 Vac, 50% load @ 40°C) STANDARDS EMC AS/NZS CISPR32 Electrical Safety IEC 62368-1, IEC 61010-1 & -2 -201 CE In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU SELECTION TABLE Model Number Output IEC Socket Delta Power Supply PBB2P-120W-IEC-12V 12V / 10A Y DRL-12V120W1EN PBB2P-120W-IEC-24V 24V / 5A Y DRL-24V120W1EN PBB2P-120W-IEC-48V 48V / 2.5A Y DRL-48V120W1EN