Full Electric Walkie Pallet Stacker 700-1500kg

Risenmega · CDD Series Full Electric Walkie Pallet Stacker — Electric Drive, Electric Lift Risenmega's full electric walkie pallet stacker pairs a 48V electric drive motor with a 48V electric lift motor, so the operator steers, travels, and raises the load without pushing a single kilogram by hand. Built as a compact walk-behind electric stacker for 700 kg, 1,000 kg, and 1,500 kg duty, it's engineered for warehouses, workshops, loading docks, and — thanks to its anti-slip-out middle wheel and chrome outriggers — for one of the toughest jobs a pallet stacker ever does: getting on and off a delivery truck safely. Capacity 700–1,500 kg Fork Lift up to 1,600 mm 48V Electric Drive + Lift CE Certified CDD Series full electric walkie pallet stacker — walk-behind, dual electric drive & lift Definition: A full electric pallet stacker is a walkie stacker where both travel and lift are powered by an electric motor — as opposed to a semi-electric stacker, which only powers the lift and still has to be pushed by hand. The Risenmega CDD Series is a full electric pallet stacker built on this design, rated for 700 kg, 1,000 kg, or 1,500 kg. Most "electric" stackers only power the mast — you still push the whole machine by hand. This one doesn't. Every CDD-series unit drives itself and lifts itself, cutting operator fatigue on repetitive loading runs and keeping the job to one person instead of two. It's the difference between a semi-electric stacker and a genuine full electric pallet stacker — and it shows up in every shift. Built In, Standard What Makes It a Full Electric Stacker Eight engineering details that separate a walk-behind electric stacker built to run every day from one built to sit on a spec sheet. 01 Dual Brushless DC Motors 48V brushless drive and lift motors — no carbon brushes to replace, ever, and roughly 20% lower energy use than a brushed motor of the same output. 02 Widened Shock-Absorbing Casters A wider wheel stance with built-in shock absorption keeps the chassis stable under load while tracking straight over rough dock and yard surfaces. 03 Articulating Middle Wheel The floating middle-wheel design rolls smoothly across asphalt, concrete, ramps, and dock lips instead of hanging up on the transition. 04 Free-Lift Mast Forks pick a pallet straight up off the ground with no change in overall vehicle height — it slides under low truck beds and containers with no clearance surprises. 05 Space-Saving Knock-Down Frame The compact split-frame design ships flat-packed — up to 36 units fit into a single 20-foot container, cutting your landed cost per unit. 06 Forced Speed-Limit at Height Travel speed automatically drops as the forks rise, protecting the load and the operator whenever the stacker is working near full lift. 07 Anti-Roll-Out Middle Wheel A dedicated wheel-retention design keeps the stacker from sliding out of the truck bed while it's being loaded or unloaded — right where most transport accidents happen. 08 Chrome-Plated Outrigger Legs Hard-chrome straddle legs resist corrosion and abrasion, staying smooth and rust-free long after painted legs would wear through. Also standard: high-strength alloy-steel frame · lightweight chassis for easy single-operator handling · independent power-lower / gravity-lower control to stretch battery life between charges · full CE certification across the range. Where It Works Built for Low-Clearance, High-Frequency Lifting With a fork lift range of 800–1,600 mm, this electric forklift stacker is sized for jobs where headroom and precision matter more than reaching the top of a rack. Loading and unloading pallets on delivery trucks and vans Warehouse and distribution-center dock work Workshops, light manufacturing, and assembly lines Retail backrooms and e-commerce fulfillment stations Low-level shelving and staging areas Purpose-Built Detail Engineered to Get On and Off a Truck Safely Loading a pallet stacker onto a delivery truck — and getting it back off again — is often the riskiest few minutes of its working day. The anti-roll-out middle wheel and chrome-plated outriggers on this walk-behind electric stacker are built specifically for that moment, keeping the chassis planted on the ramp instead of sliding out from under the operator. Loading — Step 1 Loading — Step 2 Unloading Full Specifications Choose Your Capacity Three ratings on one platform. All dimensions below are factory-standard for the CDD series; contact us for lift-height or fork-spread customization. Rating Plate — Full Electric Walkie Pallet Stacker Model CDD07B700 kg CDD10E1,000 kg CDD15E1,500 kg Power & Operation Power Type 48V maintenance-free battery — electric drive + electric lift 48V maintenance-free battery — electric drive + electric lift 48V maintenance-free battery — electric drive + electric lift Operation Type Walk-behind (pedestrian) Walk-behind (pedestrian) Walk-behind (pedestrian) Load Center (C) 400 mm 400 mm 400 mm Chassis & Wheels Wheelbase (L0) 922 mm 924 mm 924 mm Front Wheel Track (W1) 405 / 525 mm 405 / 525 mm 405 / 525 mm Rear Wheel Track (W2) 802 mm 802 mm 802 mm Drive Wheel (Ø × W) Ø185 × 70 mm Ø185 × 70 mm Ø185 × 70 mm Caster / Universal Wheel Ø75 × 50 mm Ø75 × 45 mm Ø75 × 45 mm Middle Wheel Ø45 × 30 mm Ø45 × 30 mm Ø45 × 30 mm Front / Load Wheel Ø80 × 70 mm Ø80 × 70 mm 2×Ø80×70 / 2×Ø80×60 mm Outrigger Leg Length (L3) 770 mm 770 mm 780 mm Fork & Dimensions Max Fork Height (H)* 800–1,600 mm 800–1,600 mm 800–1,600 mm Fork Spread, Outside (W3) 565 / 685 mm 565 / 685 mm 565 / 685 mm Fork Length (L2) 1,195 mm 1,195 mm 1,250 mm Fork Thickness (B1) 70 mm 70 mm 80 mm Fork Width (B2) 190 mm 190 mm 190 mm Overall Length (L1) 1,603 mm 1,603 mm 1,657 mm Overall Width 852 mm 852 mm 802 mm Closed Height (H1)* 1,155–1,955 mm 1,166–1,966 mm 1,163–1,963 mm Max Height, Forks Up (H2)* 1,875–3,475 mm 1,850–3,450 mm 1,861–3,461 mm Performance Lift Speed 55 mm/s 55 mm/s 55 mm/s Lowering Speed 100 mm/s 100 mm/s 100 mm/s Lift Motor Power 0.8 kW 1.6 kW 2.0 kW Drive Motor Power 0.8 kW 0.8 kW 0.8 kW Max Travel Speed (Slow / Full) 1 / 3.5 km/h 1 / 3.5 km/h 1 / 3.5 km/h Gradeability (Loaded / Empty) 5% / 10% 5% / 10% 5% / 10% Battery & Weight Battery Voltage 48 V 48 V 48 V Battery Capacity 25 Ah (lead-acid) 25 Ah (lead-acid) 25 Ah (lead-acid) Battery Weight 25 kg 25 kg 25 kg Net Weight incl. Battery* 299–333 kg 342–377 kg 390–425 kg * Varies with the selected fork-lift-height option (eight standard heights from 800–1,600 mm). Alloy-steel frame, chrome-plated outriggers, CE certified Why Source It Through Risenmega Backed by 5+ Years Exporting to Europe CE CE Certified Full documentation, ready for customs clearance in the EU and beyond. Q Alloy & Q-Steel Build Structural components in high-strength alloy steel for a longer service life. 20+ Countries Served Container consolidation available — combine stackers with other Risenmega machinery in one shipment. 1yr Overseas After-Sales One year of after-sales support and free replacement parts on qualifying issues. Common Questions Full Electric Pallet Stacker FAQ What is a full electric pallet stacker? A full electric pallet stacker is a walkie stacker in which both the drive (travel) function and the lift (mast) function are powered by an electric motor, so the operator neither pushes the machine nor hand-pumps the forks. This differs from a semi-electric pallet stacker, which only powers the lift and still requires the operator to manually push and steer the unit. What is the difference between a semi-electric and a full electric pallet stacker? A semi-electric pallet stacker has an electric lift motor but a manually pushed chassis, so the operator still walks the load by hand. A full electric pallet stacker, such as Risenmega's CDD Series, adds a second 48V electric drive motor that powers travel as well, reducing operator fatigue and allowing one person to handle higher-frequency loading runs. What capacities does the Risenmega CDD Series come in? The CDD Series is available in three capacities on one platform: CDD07B at 700 kg, CDD10E at 1,000 kg, and CDD15E at 1,500 kg, all with a fork lift height range of 800–1,600 mm across eight standard height options. Is the Risenmega electric pallet stacker safe for loading and unloading delivery trucks? Yes. The CDD Series is built specifically for truck loading and unloading, with an anti-roll-out middle wheel that keeps the chassis from sliding out on the ramp, plus chrome-plated outrigger legs that resist corrosion and abrasion during repeated dock use. Is the CDD Series CE certified for EU import? Yes, the full CDD Series range is CE certified with documentation ready for EU customs clearance. Risenmega has exported this equipment for more than 5 years to over 20 countries. What motors does the CDD Series use, and why brushless? Both the drive and lift functions use 48V brushless DC motors. Brushless motors need no carbon brush replacement and use roughly 20% less energy than an equivalent brushed motor of the same output. Get Pricing & Lead Time for Your Configuration Tell us your capacity and preferred fork-lift height and we'll confirm pricing, lead time, and container-loading options. Email Us WhatsApp Us